User's Manual

19
appropriate channel from the list provided depending on the
regulatory region which the unit is sold. The default setting is at
channel 11.
Encryption WEP Key:
Wireless network communications are easily intercepted. WEP
(Wired Equivalent Privacy) is an encryption method specified by
the IEEE 802.11b standard to make any intercepted
communications extremely difficult to interpret by unauthorized
parties.
To enable WEP Encryption, first decide which WEP key format
will be applied. Click on ASCII or HEX check box to select
input format as ASCII format or HEX format, and then input
WEP key. To Confirm the WEP key you must enter the data
once again in the Confirm WEP Key field.
On the Confirm WEP Key field, input the same characters as the
Encryption Code field.
Make sure the Encryption Code is the same with the access
point’ s encryption code that the Wireless Internet Camera is to be
connected under Infrastructure mode. Your PC/Notebook’ s
encryption code also needs to be setup the same with the Wireless
Internet Camera's encryption code under either Infrastructure
mode or Ad-hoc mode.
The default setting for the Encryption Key is Disable therefore, to
secure the wireless transmission be sure to Enable the Encryption
Key by entering the relevant data.