User's Manual

16
IP Assignment:
There are two options to select from the IP Assignment either
Manually Assign or Assign Automatically Using.
Manually Assign
You can click “Manually Assign” and directly enter the IP
address.
The default settings are as follows:
• Default IP – 192.168.0.20
• Subnet Mask – 255.255.255.0
• Default Gateway – 0.0.0.0
Assign Automatically Using
If your network is using RARP, BOOTP or DHCP server you can
click “Assign Automatically Using” and click on “RARP”,
“BOOTP” or “DHCP”. Under this setting the Wireless Internet
Camera will automatically assign an IP address from RARP,
BOOTP or DHCP server. Each time the Wireless Internet
Camera starts up be sure the RARP, BOOTP or DHCP server is
setup as assign a static IP to your Wireless Internet Camera.
Important Information
Access to the Wireless Internet Camera is done through assigning a
proper IP address. Please make sure to use a vacant IP address when
you assign the IP address for the Wireless Internet Camera. This will
prevent errors from occurring if the IP address is overlapped.