User's Manual

7
HDMI / MHL
• On the default menu screen, select “HDMI/MHL” icon to enter wired connection
mode.
• For MHL connection, use MHL cable (sold separately) to connect PicoBit with an
Android mobile device.
• For HDMI connection, use Micro HDMI to HDMI cable (sold separately) to connect
PicoBit with the device.
• You may tap touchpad with two fingers or disconnect cable connection to exit
HDMI/MHL mode during usage.
DLNA
Desired mobile device must have applicable DLNA app installed and running.
(Ex. ArkMC, BubblePnP, etc.)
1
Go to “Apps” icon on the default menu screen, then find “Setting” icon to
check connected WiFi on PicoBit.
2
Connect to that same WiFi network on a mobile device.
3
After verifying that PicoBit and the mobile device are connected to the same
network, select “Apps” icon on the main menu.
4
Find and select “eHomeMediaCenter” app to enter DLNA mode.