User's Manual

4
Product Mode Charging the Device
1
LED indicator - Different colors of LED indicator located below touchpad
represent status of the PicoBit.
• Solid Blue – PicoBit is powered on
• Blinking Blue – In sleep mode
• Green – Fully charged
• Red – Charging
2
Power on – Press power switch for 3 seconds.
3
Power off – Press power switch for 6 seconds. After 3 seconds, power menu
will be displayed. Continue to press it for another 3 seconds, and the product will
power off.
4
Power menu – While product is turned on, press power switch for 3 seconds
to see the Power menu (Power off or Restart option). This menu does not show
during HDMI or WiFi Display mode.
5
Automatic sleep mode – PicoBit automatically enters sleep mode (power save
mode) after idling for 5 minutes. To wake up sleep mode, press the power button
shortly and PicoBit will display the image shown before entering the sleep mode.
Users can set sleep mode time through Android settings app. Automatic sleep
mode does not work during HDMI connection or WiFi Display connection with a
mobile device.
6
APC (Auto Power Control) setting – This setting is to efficiently control the
amount of light emitting from PicoBit’s laser diodes. Due to this setting, a thin
white line on the top of the screen will always be present when PicoBit is turned
on.
Battery Operating Time: Approx. 2 hours
Battery Charging Time: 4-5 hours
To charge PicoBit : Use the supplied USB Type-C cable and power adapter to
charge the device.
Please note that using other adapters than the one provided may result in longer
charging times or damage to the internal battery.
Environmentally Friendly Disposal and Recycling
To protect the environment, dispose this product separately
from household waste once it has reached its end of life, or
take it to your local electronic waste disposal center.