Operation Manual

Air Pico (For iOS device)

• PicoBit-S and the desired iOS device must be connected to the same WiFi network

for this feature (If there is no WiFi network available, use iOS device’s hotspot to

connect PicoBit-S’s WiFi to the device).

• Select “Connect” menu icon on the main menu, then “iOS” icon to enter the Air

Pico mode.

• Below image will be displayed upon entering Air Pico mode.

• Follow instructions on screen: On your iOS device, pull up the task bar from the

bottom of screen and select AirPlay.

• Select “PICOBIT-S XXXXX” on your iOS device.

• PicoBit-S will start mirroring display upon successful connection.

HDMI

• Select “Connect” menu icon on the main menu, then “HDMI” icon to enter HDMI

connection mode.

• For HDMI connection, use Micro HDMI to HDMI cable (sold separately) to connect

PicoBit-S with the device.

• You may tap touchpad with two fingers or disconnect cable connection to exit HDMI

mode during usage.

Note

During HDMI connection, it is recommended to use 3.5mm audio jack to

connect to an external speaker (Bluetooth speaker is not recommended).