Operation Manual

4
• Left click – Tap once • To go back or cancel – Tap once
with two fingers
• Scroll – Tap once and hold down
with two fingers. Without releasing
the fingers, scroll up and down.
• Zoom in & out – Using two
fingers, pinch in to zoom out and
pinch out to zoom in.
• Drag – Tap once and hold down.
Without releasing the finger, slide
finger in any direction to drag.
Release finger on desired area.
• Long Press – Tap once and hold
down. Menu willl display with
available options (Copy, Paste, Save,
etc).
Product Mode
1
LED Indicator - Different colors of LED indicators located below touchpad
represent status of the PicoBit-S.
• Solid Blue – PicoBit-S is powered on
• Green – Fully charged
• Red – Charging
2
Power On – Press power switch for 3 seconds.
3
Power Off – Press power switch for 6 seconds. After 3 seconds, power menu
will be displayed. Continue to press it for another 3 seconds, and the product will
power off.
4
Power Menu – While product is turned on, press power switch for 3 seconds
to see the Power menu (Power off or Restart option). This menu does not show
during HDMI or WiFi Display mode.
5
APC (Auto Power Control) Setting – This setting is to efficiently control the
amount of light emitting from PicoBit-S’s laser diodes. Due to this setting, a thin
white line on the top of the screen will always be present when PicoBit-S is turned
on.