Operation Manual

15
Specifications
Item Specification
Display Method Laser Beam Scanning
Product Lifetime 14,000 hours
Brightness
63 ANSI lumen*
(The perceived brightness is about 100 lamp-based
projector (DLP) lumen)
Aspect Ratio 16:9
Throw Ratio 1.3 : 1
Sequential Contrast Ratio 80,000 : 1
Resolution 1920 X 720p (Upscaled HD)
Color Depth 16.7 M colors (R/G/B 24bit)
Focus Infinite Focus (Always-in-focus)
Maximum Image (Screen) Size 250 inches (Depending on ambient light)
Embedded OS Android 5.1.1 (Lollipop)
CPU Quadcore 1.3 GHz
Internal Memory 4 GB
WiFi Dual (2.4 Ghz & 5 Ghz)
Bluetooth 4.0
Battery Capacity Approx. 3,500 mAh
Operating Time
Approx. 2.5 hours
(Average movie playing time on SD card)
Audio Interface Internal speaker, 3.5mm ear phone jack, or Bluetooth
Operating Temperature 32 °F – 104 °F (0 °C – 40 °C)
Size
138 x 66.5 x 15 mm
(5.4 x 2.6 x 0.6 inches)
*The perceived brightness of laser projectors with a given ANSI brightness measure is about
1.7 times higher to human eye.
Safety Precautions
• This product is not waterproof – avoid using it near water or wet places.
• There is a risk of malfunction if product is used in places where sudden or extreme
temperature changes occur.
• Applying excessive force or impact to this product may result in product damage,
and will void warranty.
• Never attempt to disassemble or service this product yourself. Doing so can result in
electrical shock and void warranty.
• This is a Class 3R Laser product. For your safety, please do not look directly into the
laser source. Doing so may damage your eyes.
• It is not recommended to use PicoBit-S continuously for more than 4-5 hours or
continuously charge for a long period of time. Due to the structure of the projection
module, heat problem with module may occur if PicoBit-S is continuously played or
charged for a long period of time. Please cool off the device by turning it off after
playing it for 4 – 5 hours.