User's Manual

Charging the battery

You must fully charge the battery before using your phone for the first time.

1. Connect Charger cable to the micro charger port on the right of your phone.

2. Connect charger to an AC wall outlet.

When all the battery scroll bars are steady, the battery is fully charged. You can then disconnect the charger.

Switching the phone on and off

 Press and hold the

Power Key.

Notes:

1. If the phone shows “Insert SIM ” when SIM card is properly inserted, contact your network operator or service provider.

2. You can also use the phone without SIM card. If the phone asks PIN code, key in the PIN code, and press the Left Soft

Key (LSK) to confirm.

3. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

Call Functions

This section gives you information about the calling service supported in your phone.

Making a call

In standby mode, key in the number, including the area code, and press Send Key. Your phone will dial out by using

SIM.

To make a call from the Phonebook

In the standby mode, press the HOME Key to enter the main menu, and then select Phonebook. Scroll to the

desired contact name or type the name in the search bar, and then press Send Key to make the call.

To make an international call

1. For international calls, enter the international prefix (character +).

2. Key in the country code, area code and the phone number.

3. Press Send Key

to call.

Answering or rejecting an incoming call

To answer the incoming call

 Press Send

Key to answer the call when the phone rings.

 To reject an incoming call, press the End Key to reject the call.

Call Waiting

If you want to answer another incoming call, you should activate the call waiting function for the SIM at first.

1. During a call, press Send Key to answer

the new incoming call. You can swap back anytime by pressing

the Left Soft Key (LSK) and select Swap.

Input Method

You can key in text by pressing the keypad.