User's Manual

 SIM Lock: This function allows you to lock the phone with a specific SIM card. The feature is designed to

prevent the use of your SIM cards by means of another person’s phone if your SIM cards lost. You can

switch on or off to activate the PIN Lock function.

 Phone lock: You can switch on or off to activate the phone lock function to protect your phone .If you

switch phone lock on, you need to enter the password to set the request on. The default password is 1122

 Auto keypad lock: This allows you to lock the phone’s keypad to prevent accidental key pressed.In Auto

keypad lock submenu,select the time that after the last key press will be disabled ,and press OK

 Fixed Dial: This function dials only the numbers in the fixed dialing number (FDN). To save and edit

numbers on the list, you need the PIN2 code.

 Barred Dial: Allows you to switch on or off restricted call function. However, you need to check if your SIM

supports this function.

 Change password: Allows you to change PIN, PIN2 and phone lock password.

Connectivity

Bluetooth (BT)

Your phone is designed to be compliant with Bluetooth technology. Bluetooth technology enables wireless

connections between electronic devices. The Bluetooth connection can be used to listen to stereo music, send

images, video, texts and vCards.

To start using Bluetooth technology

Your Bluetooth connection needs to be configured prior to operation. Your phone provides the following options:

 Power

 Inquiry audio device

 My device

 Active devices

 Settings

 About

Power

1. In Settings > Connectivity.

2. Select Bluetooth.

3. Select Power to switch on/off the Bluetooth connectivity.

Inquiry Audio Device

To pair with BT audio device, follow the steps below:

1. In Settings menu, choose Connectivity > Bluetooth.

2. You will have to power on the Bluetooth connectivity of your phone and the device you wish to connect first.

3. After the Bluetooth connectivity is turned on, select Inquiry audio device. Your phone will automatically

search the device.

4. Whenever you select the device, there will be a pop-up message to notify you.

5. Press Pair to pair your phone with the headset. You might need to enter the headset password which is

factory-set, refer to its documentation for further information.