User's Manual

You can also cancel all divert settings by selecting Cancel all divert.

Call Barring

Allows you to limit the use of your phone to specific calls. This can be applied to incoming calls (all calls

or when roaming) and/or to outgoing calls (all calls, international calls, international calls except to home

PLMN). To activate call barring, you need to enter a communication limit code. This barring code will then

be sent to the network for validation.

Note: This operation only supports GSM calls.

You can cancel all call barring.

You can modify your barring code by selecting Change Barring Password.

Auto Redial

When On, if the person you are calling is busy, your phone will automatically redial the number until a

sucessfully connection is made or until the maximum number of attempts is reached.

Speed Dial

Enable Speed Dial: Press the Left Soft Key [On/Off] to activate or deactivate.

Set Number: Select 2 to 9 as the speed dial location. Press the Left Soft Key [Options] and select Edit to

enter the phonebook. Press the Navigation Key Up/Down to select the contacts and press the Left Soft

Key [Ok] to confirm and save. After setting, you can make a speed dial call by pressing and holding the

related key in idle mode.

Call Time Display: Press the Left Soft Key [On] or [Off] to display the duration of your calls.