User's Manual

UTPCD_USERMANUAL
25
4. Long press ＊key or # key to search last or next channel.
5. Press LSK to enter following options:
-Saved to preset/Rename
If current channel has not ever been saved, you can select “Save” to enter channel list.
Press NK Up or Down to select the channel that you want to recover, then press LSK to enter
the editor of channel name, on which you can input name and press LSK to save.
If current channel has been saved, you can select “Rename” to enter the editor of
channel name to change and press LSK to save.
-Radio preset：Press NK Up or Down to select channel and then press LSK to switch
current channel to selected one.
-Set frequency: You can input frequency directly to search channel.
-Auto tune: After selecting this menu, your mobile phone will search channel
automatically and save them in channel list.
--Play in background: You can select On or Off to activate or deactivate play radio in
background. If activated, you are able to do other operations while listening to radio. And you
can press Hang-Up key to exit FM radio in idle.
-Zone setting：You can set different zones, including Asia, Europe and USA to change
the area of inching adjustment.
-Help: You can get using help from this menu.
♦ Memory status: View memory status, including total volume, used volume, percent of
used volume, percent of left volume.
4.4 Call info
This menu is used to manage your mobile phone and related fees, including:
♦ Counters
Cost limit: Set a cost limit no higher than 8 digits.
Reset call timers: When selected, “Ok to reset?” appears. You can select OK to reset call
timers or select Cancel to not reset.
Total duration: View the total call times of outgoing or incoming calls
Show: View total fees
Reset call costs: This function is only available when you input the correct PIN2 code.
Charge rate: Enter your PIN2 code then set a charger rate.
Note: Please contact your operator to get your PIN2 code. If you enter the
wrong PIN2 code three times, your SIM card will be blocked. At that time, you will
have to enter a PUK2 code that is also provided by your operator. However, if you
enter the wrong PUK code ten times, your SIM card will be blocked forever.
♦ Settings
-Call forward: You can set data calls, voice calls or fax calls to be forwarded to an
assigned number or voicemail box unconditionally or if there’s no reply or if you are
unreachable or busy.
-Any key answer: Select Deactivated or Activated. When activated, you can press any