User's Manual

UTPCD_USERMANUAL
15
NK Up Move cursor up Same as SP
NK
Down
Move cursor down Same as SP
NK Left Move cursor left Same as SP
NK
Right
Move cursor right Same as SP
LSK Confirm or open options Open options
RSK Delete or go back to last screen
Delete all or go back
to idle screen
Dial key N.A N.A
Hang-Up
key
Return to idle mode Same as SP
Normal operation order of 123 is as below:
♦ Press any numeric key from 0 to9 to input corresponding number.
♦ Press # key to show symbols table; press NK Up/Down/Left/Right to view all symbols; press
corresponding numbers to insert symbols.
♦ Press＊ key to switch between editors repeatedly.
♦ Short press RSK to delete one number or press and hold to delete all text.
♦ Press LSK “OK” to view options from which user can select save, send, add sound or add
graphic.
3 Call
When the operator name is shown on screen, you can make or answer a call. The signal in the
left upper corner of screen indicates the strength of network (it indicates the most strong signal
when 5 bars are shown).
3.1 Home call
Press numeric keys to input phone numbers, and then press the Dial key to start calling. If
you need to change a number, press the RSK to delete. To end the call, press the Hang-Up key.
3.1.1 Dial ext. number
Numbers with extensions cannot be directly dialed. First you need to dial the number, then
insert the pause symbol “W” between the exchange number and the extension number and your
mobile phone will finish dialing, i.e. automatically dial the extension number. To insert a "W"
pause, press and hold the "#" key.