UTPCD_USERMANUAL Safety Information and Notices Preface • • • • • Thank you for purchasing this Cell phone. To properly operate your new cell phone, carefully read this user’s manual first. To prevent any possible accident or malfunction which may be caused by improper operations, please detailed review the following “Safety Information and Notices”. Safety warnings are needed to avoid bodily injury or property damage.
UTPCD_USERMANUAL Using the Cell Phone Warning: • Don’t use the phone while you are driving. To avoid any traffic accident and away from danger, park your car in a safe place before using it. • Usage of cell phones in aircraft or in hospitals is prohibited. Switch the phone off to prevent interference with electronic medical devices. Follow any rules or regulations in such places. • Don’t use the phone at a gas station, near fuel or chemicals.
UTPCD_USERMANUAL Warning: • Take the battery out and do not use the battery any more when abnormal charging or storing situation occurs, such as overheating, changes of color, shape, etc. • If the battery leaks liquid on your skin or clothes use water to wash affected parts of your body immediately. • If the battery leaks liquid or produces a weird odor, dispose of it away from the fire to avoid possible explosion or fire.
UTPCD_USERMANUAL Requirements for Cell Phone • • Avoid using your mobile phone in extremely high or low temperature Places. It is recommended to use the phone in a temperature range from 5ºC~35ºC and humidity of 35%~85%. It is recommended that you don’t use your mobile phone near a telephone, TV set, radio or other radio frequency sensitive devices. Requirements for the Battery • • Battery should be located in a cool, well-ventilated place with sunshine.
UTPCD_USERMANUAL Contents Preface ..............................................................................................................................................1 1 Introduction....................................................................................................................................6 1.1 Phone display ..............................................................................................................................6 1.2 Function key.......................
UTPCD_USERMANUAL 1 Introduction 1.1 Phone display 1.
UTPCD_USERMANUAL View Contacts Press Navigation key Down Idle Change Ringer volume Press Navigation key Up Idle Send SMS Press Navigation Key Right Idle Input phone number Press numeric key Idle End call Press Hang-Up key In call Answer call Short press Dial key Incoming call Voicemail box Press and hold 1 key Idle Activate handsfree Press and hold Pick up key In call 1.
UTPCD_USERMANUAL -Remove the back cover. -Remove the battery by lifting it out at the two concave sides. Warning: You must switch the phone off before removing the battery; otherwise the SIM card and your mobile phone might be damaged. To install the battery: -Battery terminal should face the battery connector in the plastic cabinet. -Press the top part of battery down until the battery is completely in the battery compartment. 1.4.1.2 Charge battery ♦ ♦ ♦ Plug USB charger into electricity power.
UTPCD_USERMANUAL phone will read SIM card automatically). In order to prevent losing or damaging the information in SIM card, you should avoid touching the metal side and keep your SIM card away from electrical or magnetic areas. You cannot use your mobile phone normally if your SIM card is damaged. Warning: You must switch off the phone before removing the SIM card. Do not insert or take out your SIM card when your mobile phone is connected with external electricity power.
UTPCD_USERMANUAL GHI JKL MNO 7 PQRS 8 TUV 9 WXYZ ＊+ 0. # ＊key：Press to switch between editors. LSK： Usually press to confirm or open options from which user can select save, send, add sound or add graphic. RSK： Usually press to delete in text editor. In idle mode, press to access Messaging menu. Within a menu, press to return to the previous screen. if not, it used to go back. ＃key：Press to hide or display symbol table.
UTPCD_USERMANUAL 8 TUVtuv 8 9 WXYZwxyz 9 ＊ Switch between editors Same as SP # Key Show or not show symbols table Same as SP NK Up Change word, letter or move cursor up Same as SP NK Down Change word, letter or move cursor down Same as SP NK Left Change word, letter or move cursor left Same as SP NK Right Change word, letter or move cursor right Same as SP LSK Confirm or open options Same as SP RSK Delete or go back to last screen Delete all or return to idle
UTPCD_USERMANUAL 0 Switch to capital or lowercase 0 1 Blank space 1 .
UTPCD_USERMANUAL automatically suggest a word based on the letters you entered. Press the Navigation key to change word or letter. Press LSK or 1 to input the selected word or letter. Press # key to show symbols table; press NK Up/Down/Left/Right to view all symbols; press corresponding numbers to insert the symbol, press 1 repeatedly to select and input symbols. Press＊ key to switch editors repeatedly. Press the “0” key to switch between capital and lowercase.
UTPCD_USERMANUAL RSK Delete or go back to last screen Delete all or return to idle mode Dial key N.A N.A Hang Up Return to idle mode Same as SP Normal operation order of Abc: Press any numeric key to input the corresponding letter. Press the numeric key repeatedly to get different letter or related number. Press the Navigation key to move the cursor.
UTPCD_USERMANUAL NK Up Move cursor up Same as SP NK Down Move cursor down Same as SP NK Left Move cursor left Same as SP NK Right Move cursor right Same as SP LSK Confirm or open options Open options RSK Delete or go back to last screen Delete all or go back to idle screen Dial key N.A N.A Hang-Up key Return to idle mode Same as SP Normal operation order of 123 is as below: ♦ ♦ ♦ ♦ ♦ Press any numeric key from 0 to9 to input corresponding number.
UTPCD_USERMANUAL To dial a number with an extension: District code + exchange number + W + ext. number + Dial key Note: When the exchange number connects, but before the extension goes through, your mobile phone will display dialing screen. At that time, you can input other extension number to dial; otherwise, it will dial the original extension number. 3.2 International call To dial an international number, press and hold ＊ key until the prefix sign “＋” appears on the display.
UTPCD_USERMANUAL 3.6 Call menu ♦ ♦ ♦ ♦ ♦ ♦ ♦ Press LSK to enter “Call option” when in call： End call：End current call Name list：View contacts Mute：Caller cannot hear your voice but you can hear them. Activate h/free/No hands free：Activate or deactivate the Call hands free option. Messages: You can enter the Archive, Inbox, Outbox or Create message. Call list：View call list Notepad：You can enter a number while on a call in order to save or do other operations after ending call. 4 Function menus 4.
UTPCD_USERMANUAL Operator serv. Operator provides SIM card related services (Please contact your operator for detailed information). Contacts Your mobile phone provides you a contacts function, including creating and managing contacts. 4.1.2 Roll, search and select function In idle mode, press the LSK to enter main menu, press the Navigation key to roll and switch menus In submenu or option, press the Navigation key to roll to the desired function, then press the LSK to enter the function. 4.1.
UTPCD_USERMANUAL 1-2-5-3 Signature 1-2-5-4 Valid. period 1-2-5-5 Delivery rept.
UTPCD_USERMANUAL 3-2-3 Alarm clock 3 3-2-4 Snooze 3-3 Calculator 3-4 FM radio 3-5 Memory status 4 Call info 4-1 Counters 4-1-1 Cost limit 4-1-2 Total duration 4-1-3 Reset call timers 4-1-4 Show 4-1-5 Reset call costs 4-1-6 Charge rate 4-2 Settings 4-2-1 Call forward 4-2-2 Any key answer 4-2-3 Call waiting 4-2-4 Auto redial 4-2-5 Caller ID 4-2-6 Mailboxes 4-3 Call list 4-3-1 Delete all 4-3-2 All calls 4-3-3 Missed calls 4-3-4 Received calls 4-3-5 Outgoing calls 5 6 Operator serv.
UTPCD_USERMANUAL Broadcast SMS is the common message sent by your operator. By using broadcast SM service, you can receive every kind of message from your operator, such as weather, taxi, hospital and other information. As for usable message, please contact with your local operator. Note: Broadcast SMS function needs operator support. ♦ SMS -Archive: SMS moved from the Inbox or Outbox appears here.
UTPCD_USERMANUAL Call back：Call back sender. Outbox：Save sent and draft SMS. Note: You should first activate Auto save in settings, and then sent SMS will automatically be saved in Outbox. Select one SMS from Outbox, press LSK to read, and then press LSK again to enter following options: Delete: Delete selected SMS. Edit: Re-edit SMS and send to sender or another recipient. Move to Archive: Move selected SMS to Archive and remove the SMS from Outbox at the same time.
UTPCD_USERMANUAL ♦ ♦ -Vibra alert：Select On or Off to activate or deactivate vibrate mode. Display：You can set the duration of the backlight, the levels of contrast and set the wallpaper that appears in idle screen. By selecting Pictures, you can enter a list of pictures. You can view the picture in full screen by pressing the RSK or to access options including delete, set as wallpaper and rename by pressing the LSK Time and date：You can set the date and time of your mobile phone.
UTPCD_USERMANUAL press LSK “OK” or RSK “Back” to go back to game screen and continue playing. -Snake The aim of this game is to control the moving “snake” and avoid hitting the wall or itself to eat different dots on the screen.
UTPCD_USERMANUAL 4. Long press ＊key or # key to search last or next channel. 5. Press LSK to enter following options: -Saved to preset/Rename If current channel has not ever been saved, you can select “Save” to enter channel list. Press NK Up or Down to select the channel that you want to recover, then press LSK to enter the editor of channel name, on which you can input name and press LSK to save.
UTPCD_USERMANUAL key (except Hang-Up key) to answer an incoming call. -Call waiting：Select On or Off to activate or deactivate this function. You can also request the status of Call Waiting. -Auto redial：Select On or Off to activate or deactivate this function. When activated, your mobile phone will redial automatically until the person you're calling is reached. -Caller ID: You can select hide or show identity and request status. -Mailbox : to create voicemail number.
UTPCD_USERMANUAL Copy to phone: Copy all contacts in SIM card to phone contacts. ♦ Name list Own number: Save your personal phone number. Emergency number: Dial or hands free dial emergency number. If SIM contacts is selected: Create new contact. Input name, number, and then select number type to save new contact.
UTPCD_USERMANUAL Make default：Set selected number as default value. Delete：Delete selected number. Change type: Change the type of selected number. Select group: Select or not select group. Delete：Delete selected contact. 5 Precautions Please carefully read and observe the terms below: Safe power on Do not use your mobile phone where it is forbidden to use or you might cause disturbance or danger. Safe transportation firstly Please observe all related local laws and regulations.
UTPCD_USERMANUAL Use qualified after sale service Only qualified maintainer can install or repair your mobile phone. Accessories and batteries Only use authorized accessories and batteries and do not connect to unmatched manufacturers or products. Waterproof Your mobile phone is not waterproof. Please keep it away from water. Backup Do remember to make a backup or keep a written record of all important information saved in your mobile phone.
UTPCD_USERMANUAL Idle time short becomes Idle time is related to network settings. If the mobile phone is in the area where network connection is not good, please temporarily shut off your phone. Need to change battery Change new battery。 When cannot receive signals, your mobile phone will continue to send to find basis and a lot of battery volumes are used, so as to short idle time. Please move to the area where signal is strong or temporarily turn off your phone.
UTPCD_USERMANUAL 7 RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types GFW1218 (FCC ID: T38UT1082) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.130 W/kg and when properly worn on the body is 1.100 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.
