User's Manual

10

off.
Charging the Battery
Your phone is powered by a rechargeable battery. The
new battery is partially charged. A sound alert will warn
you when the battery level becomes low.
Make sure the battery is not removed. To charge the
battery, plug in the connector at the bottom of your phone
(USB interface), and then plug the other end into an AC
power socket.
The battery symbol indicates the charging status.
During charging, the charge indicators will scroll;
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
The only way to turn off the charger is to unplug it, so it is
advisable to use an easily accessible AC power socket. If
you do not intend to use your phone for several days, we
recommend that you remove the battery. If the battery is
not charged, the battery icon will reappear after a few
minutes of charging.
Inserting a micro SD Card
Your phone has a slot for a micro SD card.
1. With the metal contacts facing down, gently put the
SD card into the slot. Note: The metal contacts are
facing forward.
2. If you want to get the T-Flash card out, gently press
the SD card, then you can remove it from your
phone.