User Manual

10

On release, the phone options menu opens, select Power
off.
Charging the Battery
Your phone is powered by a rechargeable battery. The
new battery is partially charged. A sound alert will warn
you when the battery level becomes low.
Make sure the battery is not removed. To charge the
battery, plug in the connector at the left side of your phone
(USB interface), and then plug the other end into an AC
power socket.
The battery symbol indicates the charging status.
During charging, the charge indicators
will scroll; it
takes about 8 hours to fully charge the battery.
When all the scroll bars
are steady, the battery is fully
charged. You can then disconnect the charger.
Talking time can go up to about 120 minutes. Stand-by
time can go up to about 48 hours. Depending on the
network conditions, user settings, method of use, the
actual results may vary.
The only way to turn off the charger is to unplug it, so it is
advisable to use an easily accessible AC power socket. If
you do not intend to use your phone for several days, we
recommend that you remove the battery. If the battery is
completely discharged, the battery icon will reappear after
a few minutes of charging.
Inserting a microSD Card
Your phone has a slot for a microSD card. The slot is
located on the right of the SIM card slot.
Insert the SD card
1. Lift up the T-Flash card cover beside the SIM card
slot. Pull the cover to right if it is locked and then lift
it.
2. With the metal contacts facing down, gently put the
T-Flash card into the slot.
3. Pull the cover to left to lock it.