User's Manual

2. With the metal contacts facing to the metal contacts in the slot, gently slide
the SD card into the slot and press down until the card locks into place (6).
the metal contacts are facing down.
3. If you want to get the T-flash card out, gently press the T-flash card, then
you can remove it from your phone.
2.3 Turning the phone on
To turn the phone on, press and hold the End /Power Key. If you have already
enabled the Sim Lock fucntion then enter the PIN code (the 4 to 8 digit secret code of
your SIM card). It is preconfigured and provided to you by your network operator or
retailer. If you enter an incorrect PIN code 3 times in succession, your SIM card will
be locked. To unlock it, you must obtain the PUK code from your network operator.
2.4 Charging the Battery
1. Ensure the battery in inserted in the handset. To charge the battery, plug in
the charger connector at the right of your phone (USB interface) and then plug
the other end into an AC power socket.
2. The battery symbol indicates the charging status. While charging, the charge
indicators will scroll. When all the scroll bars are steady, the battery is fully
charged.
3. Disconnect the charger from the phone.
4. Disconnect the charger from the AC power socket.
Note: If the battery is powerless, the battery icon will reappear after a
few minutes of charging.