User's Manual

25
• Remote control
• My device
• Active devices
• Settings
• About
Power
1. In Settings > Connectivity.
2. Select Bluetooth.
3. Select Power to switch on/off the Bluetooth connectivity.
Inquiry Audio Device
To pair with BT audio device, follow the steps below:
1. In Settings menu, choose Connectivity > Bluetooth.
2. You will have to power on the Bluetooth connectivity of your phone and the device you wish to connect first.
3. After the Bluetooth connectivity is turned on, select Inquiry audio device. Your phone will automatically
search the device.
4. Select an audio device you want to pair.
5. Press Pair to pair your phone with the headset. You might need to enter the headset password which is
factory-set, refer to its documentation for further information.
6. Then you might add the BT headset to trust list and connect the headset by selecting Yes.
Notes:
1. Before using the BT headset, please make sure your device has been full charged.
2. The BT headset added to trust list would be displayed in My device list. In the future, if you wish to connect you mobile
phone with a certain BT headset, you can select from My device list for connection.
3. All active devices you have connected will be displayed in Active devices and you can disconnect anytime by
pressing Disc.
To pair BT devices
1. In Settings menu, choose Connectivity > Bluetooth.
3. Go to My device.
4. Select Inquiry new device, then press the left soft key, your phone will automatically search all BT
devices.
5. To pair with the BT device, press Pair. You should create your own password, and agree with the owner of
the other device to use the same password. Device that do not have a user interface have a factory-set
password. Refer to its documentation for further information.
To connect BT Devices
1. In Settings menu, choose Connectivity > Bluetooth.
2. Go to My device and select the BT device you wish to connect.
3. Select Options > Connect.
4. Before the BT device is connected, your phone will ask you which profile you wish to connect (it will depend
on how many profiles your BT device supports).
To send data using Bluetooth connectivity
1. Select the object your want to send.
2. Select Options > Send.
3. Choose Via Bluetooth, then your phone will search for the BT device.
4. Select the device you would like to share following by sending action.