User's Manual

20
2. Select Edit to set alarm time. First, you should turn it on.
3. To set the alarm, directly input the hours and minutes via the Numeric Keys.
4. Choose Once/Everyday/Custom in Repeat option for your ring mode.
5. In Alarm Tone option, you may customize the alarm tone from Tone selections provided or from an FM
Radio channel. Press the Navigation Left/Right Keys to switch between Tone / FM radio options.
6. In Snooze (min) option, you may set the alarm as default or set it to snooze from 1 to 10 minutes after the
alarm time is up. After the phone alerts you at the set alarm time, you may select Snooze to activate the
snooze function. If you don’t like your phone to alert you the second time, select Stop to end the Snooze
function.
7. In Alert Type option, you may set the alert method that you like your phone to remind you. You may select
from three options: Vib. only, Vib. and ring, and Ring only.
8. After you finish all the settings above, select Done to save the alarm setting.
When the alarm expires:
If the alarm time is reached while the device is powered off, the phone will switch itself on and the alarm will start to
alert. If you select Stop, the phone asks whether you want to power on the phone or not. Select No to power off the
phone or Yes to power on the phone. When the alarm alerts while the phone is powered on, the display flashes the
alarm clock image, and shows the current time. To turn off the alarm, select Stop. To stop the alarm for snooze
minutes, select Snooze.
World Clock
You can view the local date and time via selecting the GMT and city. When the cross points out a certain city, it will
show the local date and time.
Note: If you want to change the home city, please go to Settings > Phone settings > Time and date > Set home city.
Calculator
The calculator applies simple calculator function such as addition, subtraction, multiplications and division.
Currency Converter
First, you should enter the rate, and then enter the local data.
Press the Enter Key, the foreign data will be shown automatically.
Stopwatch
This function is designed to store the timepiece, which is to start or stop for exact timing.
To use stopwatch
1. From the main menu select Organizer > Stopwatch.
2. Select Typical stopwatch. You can choose different record methods and view records.
• Split Timing: When you select this, the timepiece will be saved and continue to count when you press
Split. The 2nd timepiece is recorded based on the continuous timing. You can stop and resume anytime.
• Lap Timing: When you select this, the timepiece will be saved and start the new timing when you press
Lap. The 2nd timepiece is recorded in new timing. You can stop and resume anytime.
• View records: You can view those timepieces you have recorded or delete the records.
3. Select nWay stopwatch. You can make four records by pressing the Navigation Key.