User's Manual

3.2 Turning the Phone on

To turn the phone on, press and hold the Hang Up key. Enter the PIN code if required (the 4 to 8 digit

secret code of your SIM card). It is preconfigured and provided to you by your network operator or retailer.

If you enter an incorrect PIN code 3 times in succession, your SIM card will be locked. To unlock it, you

must obtain the PUK code from your network operator.

3.3 Charging the Battery

1. Ensure the battery is inserted into the handset. To charge the battery, plug in the charger

connector at the bottom of your phone (Charger port) and then plug the other end into an AC power

socket.

2. The battery symbol indicates the charging status. While charging, the charge indicators will scroll.

When all the scroll bars are steady, the battery is fully charged.

3. Disconnect the charger from the phone.

4. Disconnect the charger from the AC power socket.

Note: If the battery is powerless, the battery icon will reappear after a few minutes of charging.

During the charging, you should not remove the battery.

3.4 Inserting a T-Flash Card

1. The T-flash card slot is located on the left side of the phone (when the phone is placed with the

keypad facing down).

2. Pull the protective cover away from the slot.