User's Manual

 6
2.2 Turning the phone on
To turn the phone on, press and hold the End / Power key. Enter the PIN code if required.
2.3 Charging the Battery
1. Ensure the battery is inserted in the handset. To charge the battery, plug in the charger connector
at the bottom of your phone (USB interface) and then plug the other end into an AC power socket.
2. The battery symbol indicates the charging status. While charging, the charge indicators will scroll.
When all the scroll bars are steady, the battery is fully charged.
3. Disconnect the charger from the phone.
4. Disconnect the charger from the AC power socket.
Note: If the battery is powerless, the battery icon will reappear after a few minutes of charging.
2.4 Inserting a T-Flash Card
1. Open the T-Flash cover on the right side of your phone.