User's Manual

21
• PIN Lock: To prevent your SIM card from illegal use, your SIM card is protected by a PIN code. If you set
the SIM lock to On, you can only use your cellular phone by entering the correct PIN code every time you
turn it on. If you enter the wrong PIN code three times, your SIM card will be locked and a PUK code will be
required. Contact your service provider for more information.
• Phone lock: You can switch on or off to activate the phone lock function to protect your phone .If you
switch phone lock on, you need to enter the password to set the request on. The default password is 1122
• Auto keypad lock: This allows you to lock the phone’s keypad to prevent accidental key pressed. In Auto
keypad lock submenu, select the time ,and press OK
• Fixed Dial: Allows you to dial only the numbers in the fixed dial list. To save and edit numbers on the list,
you need the PIN2 code.
• Barred Dial: Allows you to switch on or off restricted call function. However, you need to check if your SIM
supports this function.
• Change password: Allows you to change PIN, PIN2 and phone lock password.
Restore factory settings
This function allows you to reset the most of the phone setting to the original setting when it is produced. The
phone lock password is needed to access this function.
Extra
Calculator
The calculator applies simple calculator function such as addition, subtraction, multiplications and division.
Currency converter
First, you should enter the rate, and then enter the local data.
Press the OK key, and the foreign data conversion will be shown automatically.
Stopwatch
This function is designed to store the timepiece, which is to start or stop for exact timing.
To use stopwatch
1. From the main menu select Organizer > Stopwatch.
2. Select Typical stopwatch. You can choose different record methods and view records.
• Split Timing: When you select this, the timepiece will be saved and continue to count when you press
Split. The 2nd timepiece is recorded based on the continuous timing. You can stop and resume anytime.
• Lap Timing: When you select this, the timepiece will be saved and start the new timing when you press
Lap. The 2nd timepiece is recorded in new timing. You can stop and resume anytime.
• View records: You can view those timepieces you have recorded or delete the records.
3. Select nWay stopwatch. You can make four records by pressing the Navigation Key.
.