User's Manual

Calling 9
Quickcall
The Quickcall feature allows you to set your four
most frequently dialled numbers. You can then
quickly call one of them by selecting the
corresponding icon or picture on the screen.
Setting a Quickcall contact
1. In idle mode, press + to access the Quickcall
screen. Select a thumbnail to configure and
press , or L Set.
2. Select a name in the contacts list, and press ,
again to access the Picture album and select a
picture. Proceed the same way for each
thumbnail.
Calling a Quickcall contact
To make a call, press + when in idle mode, then
select the thumbnail of your choice and press (.
To reconfigure a thumbnail, select it and press , to
Replace the name and/or picture.
If a picture is already associated with a contact, it is
displayed in the Quickcall screen. Changing the
picture in one of the menus will also update it in the
other.
MMS Foto talk
This feature allows you to send a picture via MMS
and to add a sound recording to it. The picture can
be selected from the Picture album or can be a picture
you have just taken with the camera.
1. Take a picture, then press Menu, or select a
picture from the Picture Album, then press ,or
LOptions. In both cases, select Send by... > MMS.
2. When the Add sound? message appears, press
L Yes to start recording. Then press L Save
to stop and save your recording, or R Cancel.
3. Rename the picture if you wish or press L OK.
4. Select a contact in the list that appears and then
Add media to go to the MMS creation screen.
Press L Send to send your message, or
modify it as you want before sending it.
Handling multiple calls
The ability to handle two or more calls at one time
and to make conference calls is dependent on your
operator and/or subscription.