User's Manual

6 Getting Started
Once the battery and battery cover are back in place
you can charge the phone. Pull away the protective
rubber cap covering the charger connector. Plug in
the connector as shown below. Then plug the other
end into a main AC power socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll; it
takes around 2.5 hours to fully recharge your mobile
phone. When all the scroll bars are steady the
battery is fully charged. You can then disconnect
the charger.
Depending on the network and condition of use, talk
time goes up to 8.5 hours and stand-by time up to 1
month.
Keeping the charger plugged to the mobile when the
battery is fully charged will not damage the battery.
The only way to turn off the charger is to unplug it,
so use an easily accessible AC power socket. You
can connect the charger to an IT supply (Belgium
only).
Setting Hotkeys
You can configure the numeric keys 2 to 9 to
access your favourite features simply by long-
pressing on the numeric key. A number of hotkey
shortcuts are pre-configured.