User's Manual

58 Settings
from 2 to 9 only). The following keys are
locked:
Depending on your service provider, other hotkeys
may be predefined and locked.
1. In the list, select a key from 2 to 9 and
press OK. If the key was already programmed,
select Change.
2. Browse the list to select the function you wish
to associate with this key and press
, or
L Select. If you select Flash dial, you will be
asked to select a contact in the contacts list.
3. To use a hotkey, press and hold the programmed
key when in idle mode.
Voice command
Allows you to set up a direct access to a specific
function by linking it to a voice tag.
You can associate a voice command to most
functions supported by the hotkeys.
1. Select <New>, then browse the list to select a
function and press
, or L Select.
2. When Press OK and speak appears, record your
voice tag. Make sure you are in a quiet
environment, choose a short and simple word
and clearly pronounce it.
3. The next menu gives you access to Delete, Play,
Change function and Change voice options. Press
R Back to create another voice tag.
To use the voice command, press and hold
,
when in idle mode, then say the recorded voice tag.
To reprogram a voice command: select it, press
L OK and select Change function. This will bring
you to the list of available functions.
Voice dial
Allows you to set a voice tag that will dial the
default number for the corresponding contact
simply by saying the voice tag. To set up voice dial,
proceed as follows:
1. Select <New>, then a contact in the list, then
press
, or L Options.
When the phonebook in phone is selected, choose
the number of your choice in the list that is
displayed.
1 Call voice mailbox.
* Dial international call.
# Change language used.