User's Manual

56 Settings
Network
Contact your phone operator to have full
information about GPRS availability over
its network and for an appropriate
subscription. You might also need to configure your
phone with the GPRS settings supplied by your
operator, by using the menus described in this
section. Then select the bearer (GSM or GPRS) in
the menus of each application to be used (e.g. WAP,
MMS, e-mail, etc.).
Access settings
This menu allows you to create different data
profiles that can be used for connecting to various
services: for example, when using WAP or when
sending MMS, the selected profile will be used to
connect to the GSM or GPRS network.
Options described below are operator and/or
subscription dependent. Error messages during
connections are mainly due to incorrect parameters:
contact your operator before first use, in order to
have the appropriate settings, which you may
receive by SMS in some cases. Some pre-
configured profiles might be locked, preventing re-
programming and renaming.
Select an item in the list and press
, to access the
following options:
Change name
To rename the selected profile.
Show
To display all parameters of the
selected profile.
GSM Settings
To change the GSM settings:
• Login & Password,
• Phone number needed to
establish the connection and
provided by your operator
(ISDN or Analogue),
• Inactivity time, a value of over
30 seconds after which the
phone disconnects
automatically (if a connection
was in progress).