User's Manual

2 Getting Started
Insert the SIM card
Slide the SIM card holder to unlock it and then lift
it up on its hinge (1). Remove the SIM card from its
protective holder and (2) place it in the space
provided, making sure that the clipped corner of the
card is in the correct corner and that the gold
contacts are facing down.
Close the card holder and slide it into the locked
position.
Slide the battery back into its slot, gold contacts
downwards, then lock it by pushing it downwards
until it stops. Replace the back cover by sliding it
into its slots until it stops.
Remove the protective film covering the screen and
the camera lens before using the phone.
Switching on the phone
To switch on the phone, long-press the ) key.
Enter the PIN code if required. A PIN code is a 4- to
8-digit secret code for your SIM card. It is
preconfigured and communicated to you by your
operator or retailer. For more information on PIN
codes, see “Security” on page 46.
If you enter an incorrect PIN code three times,
your SIM card will be blocked. To unblock it, you
must request the PUK code from your operator.
When you switch on your mobile phone with your
new SIM for the first time, you will be asked for the
following:
Set date To set the current date.
Set time To set the current time.
Time zone To select your time zone.
See “Settings” on page 45 for details on these
three items.