Specifications

9.Mounting hole.
Note:
Where a button that appears on both the speaker and remote
control is referenced in this guide you can use either button to use
that function.
8.LINE:RCA and Line in jack.
7.DC:DC jack in,the connection for mains adapter.
To change your sound bar from 32" to 42"
1. At the rear cabinet,loosen screws (6 pcs is necessary) as photo
shown using a Philips screwdriver.
Only the screws indicated can be removed with the screw
driver. Do not attempt to remove other screws as it will
spoil the sound bar's operation.
10
4
5
6
7
8
1
2
3
3. Install the front panel as photo shown
4. Finally, fix it with 8 screws as photo shown
13
!!