SOUND BAR WITH BLUETOOTH RECEIVER OTE-3201 LINE/MUTE
CONTENTS Safety information---------------------------------------------------------- 2-5 Welcome ------------------------------------------------------------------------------6.7 Set up-------------------------------------------------------------------------------------8 Your 2.
SAFETY INFORMATION Maintenance 1.Do not use harsh or abrasive cleaning agents or solvents. 2.Do not attempt to disassemble your product,other than to install the 32 IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. to 42 extention piece. 3.Do not paint your product. 4.Do not drop, throw or try to bend your product. 5.Do not expose your product to open flames. ! This symbol indicates that there are important operating maintenance instructions in the literature accompanying this unit.
Troubleshooting ! WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.THE UNIT MUST NOT BE EXPOSED TO DRIPPING AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON TOP OF IT. Problem What to do NOTE:No naked flames such as candles should be placed near or underneath the unit . No power Check that the power is switched on at the wall. Check if the power cord is properly connected to the power outlet.
7.Slide the Speaker Bar onto the mounting brackets, and make Apparatus with Class 1 construction shall be connected to sure there is a firm and stable connection before letting go of the a mains socket outlet with a protective earthing connection. Speaker Bar. Keep away from rodents.Rodents enjoy biting into electric flexes. Always hold the plug when pulling out the plug from the mains 8.Finally, use the LEVEL to confirm that the Speaker Bar is level. supply socket.
Do not use this unit when moisture condensation may occur. 1. Use the TAPE MEASURE to decide how high you d like to hang Any repairs must be carried out by qualified personnel only. the Speaker Bar on the wall. The Speaker Bar must be hung within Liquids spilt into the unit can cause serious damage.Switch the 6 feet of an AC power outlet for the attached AC power cord to reach.
Mounting the Speaker Bar onto a wall We recommend having this speaker professionally mounted. Welcome Congratulations on purchasing this 2.0 Speaker Bar. The Speaker Bar allows you to play TV audio content from an attached television, and from your bluetooth enabled telephone, PC or Tablet. By using the included wall mounting accessories ,the speaker can be mounted onto a wall. Please read the warning section carefully before using your Speaker Bar.
You may also need RCA Cables 3.5mm line in cable 2 ------ 1 Note: Left(white) Ventilation CH(red) BLUETOOTH Headphone Audio output When placing the Speaker Bar on an entertainment center, TV bookshelf,or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Speaker Bar for MEMU ventilation. If the Speaker Bar is enclosed in a tight space, without ventilation, heat generated from the Speaker Bar could produce a potential heat hazard.
Operating and connecting an external device Set up You can connect external devices (Mp3 player ,CD player ,TV etc) Setting up your Speaker Bar to the Speaker Bar in several ways. 1.Plug the power cable into a standard three pin wall socket and switch the Using a RCA audio cable power on at the wall. Make sure you match up the Red (R)and White (L)Audio connectors, either RCA cable or line in/out cable only. Using a 3.
Locations of Remote Control Your 2.0 Speaker Bar Features Defined 2 1 4 2 5 6 3 8 Features Defined 1.STANDBY button:AC power is connectd but unit is in standby status. 2.BASS button:Bass effect is on. 3.3D button: 3D surround sound effect is on. 4.LINE mode button:It is connected to LINE when it is on. 5.BT mode button: Bluetooth function is on when blue LED flashs and lights. 6.Remote sensor.Ensure this area is not covered or blocked by 9 3 4 5 7 6 8 7 9 any object.
7.DC:DC jack in,the connection for mains adapter. 8.LINE:RCA and Line in jack. 9.Mounting hole. Note: Where a button that appears on both the speaker and remote control is referenced in this guide you can use either button to use that function. 3. Install the front panel as photo shown To change your sound bar from 32" to 42" 8 7 6 5 4 3 2 1 1. At the rear cabinet,loosen screws (6 pcs is necessary) as photo shown using a Philips screwdriver. 4.
Re-assemble your sound bar with 42" extender 2. Take out the front panel as photo shown. 1. Screws (4 pcs) the extender with left and right bars as photo shown. 3. Pull out the pin socket as photo shown. 2.
