LCD digital colour TV C2698DVBR USER GUIDE
LCD Screen Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue or green) may appear constantly on the LCD screen and is not a malfunction. HELP If you have any problem setting up this Television, trouble getting a signal or difficulties with the operation of the DVD player. Please Contact our Helpline where we will be able to assist you.
1 Caution 2 Safety Information 3 4 4 5 6-7 8 8-9 10 11 12 13-14 15-16 16 Unit and Accessories Getting Started Front View Rear View Remote Control Key Functions Menu Operation Basic TV operation PICTURE menu options SOUND menu options SETUP and PC SETUP menu options Channel menu options DTV menu options PIP function 17 18 SimpleTroubleshooting Technical Specifications
caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor To prevent overload, don't share the same mains supply socket with too many other items of equipment.
Unit and Accessories Unit and Accessories Source DVD TV TV/Radio Quick Start Help Menu Guide Pic Swap Exit Info VOL CH OK R DVD Menu P S Picture Sound SD1 SD2 +Day -Day 1 2 3 abc def 4 5 6 ghi jkl mno 7 8 qprs tuv wxyz SUB 0 TXT A 9 B Recording Lists Power cable 2x-AA batteries 1 x LCD TV 1 x PVR EASY START GUIDE USER GUIDE EASY START GUIDE USER GUIDE 3
Getting Started Getting Started SWITCH: Switch: Power ON/OFF LED Indicator Remote Control Window (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED Indicator: Press POWER button to turn on and standby Indicator on(Red) Standby mode Indicator on(Green) Power on mode Power TV/AV Press to display the input source menu. MENU CH+/- : press to increase (CH+) or decrease (CH-) channel number. VOL+/-: press to increase (VOL+) or decrease (VOL-) the volume level.
Getting Started 12 Switch: Turn on/off the power supply Common Interface 1. AC POWER INPUT: 100-240V AC 50/60HZ. 2. HDMI 1 / 2: (High definition multimedia interface) Connect to the HDMI output on external equipment. 3. VGA: (Video Graphics Adaptor) connect to the VGA on a PC to display PC graphics. 4. PC AUDIO: Connect PC audio cable for PC sound. 5. S-VIDEO: Connect to the S-Video output on external equipment. 6. YPbPr: Connect the cables to the YPbPr output of external equipment.
Remote Control Key Functions TV/Radio 6
TV/Radio 7
Menu Operation Basic TV operation TURN ON THE LCD TV: 1.Connect the power cable to the mains supply and turn on the power by using the “POWER SWITCH” at the rear bottom right of the set. The standby indicator on the front of the TV will light up in red. 2. Press the Power button on the right hand side of the TV or the power button on the remote control to turn on the TV, the indicator will light green. TURN OFF THE LCD TV 1.
Press the MENU button to display the main menu as below. Use buttons to select menu, and press button to enter the menu. Mains menu Picture Sound Function PC Setup Setup Sub menu Picture menu as the picture You can display the input source menu by pressing the SOURCE button on the remote control or the TV/AV button on the TV, press buttons to select, and press OK button to confirm. 9 Hint: you should operate the OSD menu according to the hint.
In this manual, the OSD (On Screen Display) may be different from your TV's because it is just example to help the TV operation. PICTURE menu options Press the MENU button on your TV or on the remote control then use the the picture menu, press the button to enter the menu (see picture below). buttons to select 1. Use the buttons to select what you want to adjust in the Picture menu. 2. Press the buttons to adjust. 3. When you are satisfied with the adjustment, press the MENU button.
SOUND menu options Press the MENU button on your TV or on the remote control then use the the Sound menu, press the button to enter the menu (see picture below). buttons to select 1. Use the buttons to select what you want to adjust in the Sound menu. 2. Press the buttons to adjust. 3. When you are satisfied with the adjustment, press the MENU button. Sound Mode Select the type of sound which best corresponds to your listening requirements by selecting Sound Mode in the Sound menu.
SETUP menu options Press the MENU button on your TV or on the remote control then use the the Setup menu, press the button to enter the menu (see picture below). buttons to select 1. Use the buttons to select what you want to adjust in the Setup menu. 2. Press the buttons to adjust. 3. When you are satisfied with the adjustment, press the MENU button. Language: Select the OSD language. TXT Language: Select the region TXT language (set west for UK) not available in DTV source.
Channel menu options The Channel menu is only available in TV mode. Press the MENU button on your TV or on the remote control then use the the Channel menu, press the button to enter the menu (see picture below). buttons to select 1. Use the buttons to select what you want to adjust in the Channel menu. 2. Press the buttons to adjust. 3. When you are satisfied with the adjustment, press the MENU button. Press the hidden options. buttons to view the UK Channel: Select the current channel for setting.
Program Table: Press the button to enter Program Table menu as below, Channel Information Operations Swap: Swap two channels' position. Select the channel, and press RED button, then select the channel you want to swap, and press OK button to swap. Move: Move a channel. Select the channel, and press GREEN button to pick-up, then select the position you want the channel to be moved to, and press OK button. Copy: Copy a channel.
Function menu options The Function menu is only available in DTV mode. Press the MENU button on your TV or on the remote control then use the the Function menu, press the button to enter the menu (see picture below). buttons to select Function 1. Use the buttons to select what you want to adjust in the Function menu. 2. Press the buttons to adjust. 3. When you are satisfied with the adjustment, press the MENU button. Red Rec Task: Opens the Timer Recording list menu for the red card.
Parental Lock: Setting or modify the Parental lock.
Simple Troubleshooting Simple Troubleshooting If the display or performance fails check the TV in accordance with the following instructions. If the TV still fails to function correctly contact your dealer for assistance. SYMPTOM REMEDY GENERAL Dead. No LED Lit Dead Led lit red No power to the TV. Set still in standby. Check all connections to the TV. Press either the Power button or on the Remote control. No signal. Blue screen. Incorrect source selected.
Techincal Specifications Techincal Specifications TV TVSystem Screen size Resolution Aerial input Audio output power PAL BG/DK/I 26"(diagonal) 1366x768pixels (RGB) (unbalanced) 75 2x10 W Power Consumption Weight AC 100-240V 50/60Hz 160 W 9.3 kg Remote control Type Control distance Control angle Batteries Dimensions Weight infrared 5m 30° (horizontal) 2 x 1.
