Specifications

Assortments & Kits
Assortments & Kits
9 8 % F i l l R a t e a n d i n c R e a s e d P R o F i t a b i l i t y – G u a R a n t e e d
PET Expandable Sleeving - Case Mod® Kits
Aftertheashingfanlights,theneonglow,thecustomwater-cooledcaseandthesuperchargedcomponents,thenaltouchforcomputercasecustomizationis“modding”
thecablesthatconnecteverything.OurCaseModcustomizationprovidescomputerenthusiastswithmanyproductstochoosefrom,includingUVreactive&chromecolors,
to manage and customize the wires, cables and hoses in their supercharged custom cases.
Working With Braided Expandable Sleeving: Braided expandable sleeving is the ideal solution for neatly and economically bundling and protecting wire or cable
assemblies.Thelight,exiblesleevinginstallseasilyandexpandsupto150%totoverplugs,inlineconnectorsandsplices.
Measuring: The sleeving should be measured on the actual wire or cable on which it will be installed. As it expands radially, the length will shorten slightly. Just slip
the sleeve over your application, mark the cut line with a pen or a marker, and remove it to cut the ends. Careful measurement will prevent mistakes and minimize
wasted material.
Cutting: It is highly recommended that the sleeving be cut with a hot knife, rope cutter, soldering iron with a cutting tip, or some other system that will cut and seal the ends
topreventfrayingduringinstallation.Whentheendsarecutandsealed,arethemslightlywithyourngerstoallowyourwirestoslipineasily.
Installing & Terminating: The easiest way to install the sleeving over long wire runs is to simply “walk” the sleeve down the length of the wire. Just push the slack
sleeving onto the end of the wire and slide it down the entire run. When you reach the end of the installation, slide your hands along the entire length to smooth out the
sleevingandproduceanishedlook.Tonishtheends,youcanuseheatshrinktubingintheappropriatesize,nyloncableties,orevenelectricaltape.Iftheendsof
thesleevingwereproperlycutandsealed,theinstallationshouldlastalongtimeandproduceaprofessional,nishedlookonvirtuallyanywire,cableorhoseapplication.
• Available in 9 different colors for cable customization.
• Hot knife is required to cut sleeving - in order to avoid fray.
• Use 5055F or 5056F hot knife tools to cut & seal sleeving - see page 146.
35
Kit Includes
•4”(18Lb.TensileStrength)BlackWireTies 12 Pcs.
 •3/8”I.D.BlackHeatShrink(ShrinkRatio:3to1) 1 Ft.
 •3/4”I.D.BlackHeatShrink(ShrinkRatio:3to1) 1 Ft.
 •1”I.D.BlackHeatShrink(ShrinkRatio:3to1) 6”
CMKO (CMK0.00BK) Black - Case Mod
®
Kit - 19 Pcs.
Kit Includes
 •4”(18Lb.TensileStrength)NaturalWireTies 12 Pcs.
 •3/8”I.D.ClearHeatShrink(ShrinkRatio:3to1) 1 Ft.
 •3/4”I.D.ClearHeatShrink(ShrinkRatio:3to1) 1 Ft.
 •1”I.D.ClearHeatShrink(ShrinkRatio:3to1) 6”
CMK9 (CMK0.00CB) Carbon - Case Mod
®
Kit - 19 Pcs.
•1/8”I.D.BlackExpandableBraidedSleeving 10 Ft.
 •1/4”I.D.BlackExpandableBraidedSleeving 10 Ft.
 •3/8”I.D.BlackExpandableBraidedSleeving 5 Ft.
 •1/2”I.D.BlackExpandableBraidedSleeving 5 Ft.
Kit Includes
•4”(18Lb.TensileStrength)NaturalWireTies 12 Pcs.
 •3/8”I.D.ClearHeatShrink(ShrinkRatio:3to1) 1 Ft.
 •3/4”I.D.ClearHeatShrink(ShrinkRatio:3to1) 1 Ft.
 •1”I.D.ClearHeatShrink(ShrinkRatio:3to1) 6”
CMK1 (CCM0.00SV) Chrome Metallic - Case Mod
®
Kit - 18 Pcs.
•1/4”I.D.ChromeExpandableBraidedSleeving 10 Ft.
 •3/8”I.D.ChromeExpandableBraidedSleeving 5 Ft.
 •1/2”I.D.ChromeExpandableBraidedSleeving 5 Ft.
 •1/8”I.D.CarbonExpandableBraidedSleeving 10 Ft.
 •1/4”I.D.CarbonExpandableBraidedSleeving 10 Ft.
 •3/8”I.D.CarbonExpandableBraidedSleeving 5 Ft.
 •1/2”I.D.CarbonExpandableBraidedSleeving 5 Ft.