Specifications

9 8 % F i l l R a t e a n d i n c R e a s e d P R o F i t a b i l i t y – G u a R a n t e e d
Tools & Testers
Tools & Testers
145
The Weather-Pack Extractor Tool is designed for extracting weather-pack terminals from their connector
housing for servicing and replacement. Designed solely to depress Weather Pack terminal retention
barbstoallowterminalremovalfromtowerorshroud.Equivalentto:
Delphi/Packard OEM#12014012 &
SPX Kent Moore J-38125-10A.
5013F Weather Pack Narrow Extractor Pick
5012F Weather Pack Extractor
Part # Blade Description
5013F Narrow blade .050“
Tapers to a .035” width. Used to release 150 Metri-Pack, 280 Metri-Pack, 280 Tangless, 280 Bus
Bar, 630 Pull to Seat, GT 150, GT 280, Wedge Base lamp socket terminals, and Indexing Candelabra
Bayonet Double Contact Lamp Socket Terminals. Used to release most GM, Ford & Chrysler OEM
terminals from their insulated housing.This tool has the smallest flat blade available. Equivalent to
Green Handle Delphi/Packard OEM#12094429 and SPX Kent Moore J-38125-12A. Also replaces
Delphi/Packard OEM#12094430 & 8913369 equivalent.
5024F Feed Master Tool
Product Features
•UsewithSplitLoom(Flex-Guard)Tubingsizesfrom3/8”thru1-1/2”.
•Usewithwires,cables&hosesupto4gauge.
•Unitcomescompletewithinstructions.   
How to use:
1. Place wire(s) through the side opening of the Feed Master tool & pivot so that wire(s) are
running through the tool & past the handle.
2. Grip the handle & secure wire(s) with thumb.
3. Lightly grip split loom with opposite hand with the slit facing outwards.
4. Hold the loom in a stationary position & pull the Feed Master tool through loom
with the other hand while keeping wire(s) in place with thumb.
Product Features
•Torchispre-filledwithbutane.   
•Technician’sSelf-IgnitingButanePocketTorch.   
•Producesflametemperatureupto1,315°C(2,400°F).   
•Refillablew/butanegas.
(Use part# 5055F for butane gas).
•Fueladjustmentdialtocontrolflame
length & butane pressure.
•Autoflip-top,forconvenient,one-handedoperation.   
•Piezo-electricignitionsystem,eliminatesneedforbatteriesorflints.  
•Singleblue-torchflame,formorepreciseflametip.   
•Useforheatshrinking,soldering&more.  
Product Features
• Torch is pre-filled with butane.
•Technician’sSelf-IgnitingButanePocketTorch.   
•Producesflametemperatureupto1,315°C(2,400°F).   
•Refillablew/butanegas.
(Use part# 5055F for butane gas).
•Fueladjustmentdialtocontrolflame
length & butane pressure.
•Autoflip-top,forconvenient,one-handedoperation.  
•Piezo-electricignitionsystem,eliminatesneedforbatteriesorflints.  
•Singleblue-torchflame,formorepreciseflametip.   
•Useforheatshrinking,soldering&more.  
5021F Pocket Torch w/ Angled Head
5022F Pocket Torch w/ Straight Head
Product Features
• TwoTemperatureSettings:
315°C (600°F) & 537°C (1,000°F).
•Low/Off/HighSwitchControl.
•CapableofProducing4,100BTU’s(1,200Watts).
•Ratedat10Amps&120Volts@60Hz.
•Includesaseparateheatdeflectorthatwillattach
on end of gun.
•Includesahanginghook&instructionw/helpfultips.
Use this Product to:
•Useforheatshrinking,soldering&more.  
•Removepaint,decals,carpet&floortiles.   
•Softenadhesives,caulking&putty.   
•Loosenrustednuts,bolts&fittings.   
•Quick-Driesalmostanything.   
•Thawfrozenpipes,locks,refrigerators,freezers, roof gutters & downspouts.
4222F Heat Gun
5014F Weather Pack Wide Extractor Pick
Part # Blade Description
5014F Wide blade .090“
Tapers to a .090” width. Use to release larger terminals including Maxi fuse terminals.
Also opens secondary locking devices on connector housings. Use to release most GM, Ford &
Chrysler OEM terminals from their insulated housing. Can be used as an OEM#12150860
&/or OEM#12094441 tool.