Specifications

9 8 % F i l l R a t e a n d i n c R e a s e d P R o F i t a b i l i t y – G u a R a n t e e d
Heat Shrink Tubing
Heat Shrink Tubing
2 to 1 Single/Thin-Wall Polyolen Heat Shrink Tubing
JT&T’s2to1Single/ThinWallCross-LinkedPolyolenHeatShrinkTubingisirradiated,exible&intendedforgeneralpurposeapplicationsrequiringrecognitionby
military&industrialspecications.ULrecognized,CSAcertied,RoHScompliant&ABSapproved.MeetsrequirementsofSAE-AMS-DTL-23053/5(formerlyMIL-I-23053/5,
MIL-DTL-23053/5),Classes1,2(Clear),3.Itissingle-wall,ame-retardant,mechanicallystrong&willnotmeltorsplitwhenshrunkoverirregularly-shapedobjects.
Applicationsincludeinsulation,jacketingwirebundles,mechanicalprotection,physical/electricalprotectionofcomponents,strainrelief,solderinsulation&lightweight
harnessing where superior abrasion resistance is a plus. Also, used to identify & color-code electrical connections & wire bundles. Temperature rating for continuous operation
from-55°C(-67°F)to135°C(275°F)&upto300°C(572°F)forshortdurations.ShrinkRatiois2to1(shrinksto1/2itsoriginaldiameter).ShrinkTemperatureis121°C(250°F).
NOTE:CleartubingisNOTameretardantorULlisted.
• Available in Retail Packs, 4Ft. Sticks, Spools, Markers & Kits
• Meets requirements of SAE-AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Class 1, Class 2 (Clear), Class 3.
• Meets requirements of AMS-3636 & AMS-3637.
• RoHS Compliant.
• UL Recognized: File E-39100.
• CSA Certied: CSA LR-38227.
• ABS Approved.
• Continuous Operating Temperature: -55°C (-67°F) to 135°C (275°F) &
up to 300°C (572°F) for short durations.
• Shrink Temperature: 121°C (250°F).
• Shrink Ratio: 2 to 1 (shrinks to 1/2 its original diameter).
• Voltage Rating: 600Volts Maximum.
• Cross-Linked Polyolen Heat Shrink Tubing.
• Single/Thin-Wall.
• Flame-Retardant.
• Flammability Rating: UL224 / VW-1.
• NOTE: Clear tubing is NOT ame retardant/rated or UL listed.
• See pages 145-146 for torches or heat gun to shrink & seal heat shrink tubing.
133
Ordering Size Expanded I.D. Recovered I.D. Recovered Wall
(Nominal) (Minimum) (Maximum) Thickness (Nominal)
3/64” 3/64” (.047”) 1.19mm 3/128” (.023”) 0.58mm 9/500” (.018”) 0.46mm
1/16” 1/16” (.062”) 1.57mm 1/32” (.031”) 0.79mm 9/500” (.018”) 0.46mm
3/32” 3/32” (.094”) 2.39mm 3/64” (.047”) 1.19mm 1/50” (.020”) 0.51mm
1/8” 1/8” (.125”) 3.18mm 1/16” (.062”) 1.57mm 1/50” (.020”) 0.51mm
3/16” 3/16” (.188”) 4.78mm 3/32” (.094”) 2.39mm 1/50” (.020”) 0.51mm
1/4” 1/4” (.250”) 6.35mm 1/8” (.125”) 3.18mm 1/40” (.025”) 0.64mm
3/8” 3/8” (.375”) 9.52mm 3/16” (.188”) 4.78mm 1/40” (.025”) 0.64mm
1/2” 1/2” (.500”) 12.70mm 1/4” (.250”) 6.35mm 1/40” (.025”) 0.64mm
3/4” 3/4” (.750”) 19.05mm 3/8” (.375”) 9.52mm 3/100” (.030”) 0.76mm
1” 1” (1.000”) 25.40mm 1/2” (.500”) 12.70mm 7/200” (.035”) 0.89mm
1-1/4” 1-1/4” (1.250”) 31.75mm 5/8” (.625”) 15.88mm 1/25” (.040”) 1.02mm
1-1/2” 1-1/2” (1.500”) 38.10mm 3/4” (.750”) 19.05mm 1/25” (.040”) 1.02mm
2” 2” (2.000”) 50.80mm 1” (1.000”) 25.40mm 9/200” (.045”) 1.14mm
3” 3” (3.000”) 76.20mm 1-1/2” (1.500”) 38.10mm 1/20” (.050”) 1.27mm
4” 4” (4.000”) 101.60mm 2” (2.000”) 50.80mm 11/200” (.055”) 1.40mm
5” 5” (5.000”) 127.00mm 2-1/2” (2.500”) 63.50mm 3/50” (.060”) 1.52mm