Specifications

9 8 % F i l l R a t e a n d i n c R e a s e d P R o F i t a b i l i t y – G u a R a n t e e d
Cable Ties & Accessories
Cable Ties & Accessories
127
4-Way Cable Tie Mounts - Nylon
Ordering Size Max Tensile Tie Opening Height Base Dimensions (+/- 0.10”) Screw
Part # (4-Way O.D.) Strength (+/- 0.02”) (+/- 0.02”) Length Width Size Color Pcs
. 4734H 0.75” Up to 40 Lbs. 0.15” 0.21” 0.75” 0.75” #6 Natural 10
4734L 0.75” Up to 40 Lbs. 0.15” 0.21” 0.75” 0.75” #6 Natural 50
4734C 0.75” Up to 40 Lbs. 0.15” 0.21” 0.75” 0.75” #6 Natural 100
4734M 0.75” Up to 40 Lbs. 0.15” 0.21” 0.75” 0.75” #6 Natural 1,000
4733H 0.75” Up to 40 Lbs. 0.15” 0.21” 0.75” 0.75” #6 Black 10
4733L 0.75” Up to 40 Lbs. 0.15” 0.21” 0.75” 0.75” #6 Black 50
4733C 0.75” Up to 40 Lbs. 0.15” 0.21” 0.75” 0.75” #6 Black 100
4733M 0.75” Up to 40 Lbs. 0.15” 0.21” 0.75” 0.75” #6 Black 1,000
4735F 1.00” Up to 75 Lbs. 0.20” 0.24” 1.00” 1.00” #8 Natural 10
4735L 1.00” Up to 75 Lbs. 0.20” 0.24” 1.00” 1.00” #8 Natural 50
4735C 1.00” Up to 75 Lbs. 0.20” 0.24” 1.00” 1.00” #8 Natural 100
4735M 1.00” Up to 75 Lbs. 0.20” 0.24” 1.00” 1.00” #8 Natural 1,000
4736F 1.00” Up to 75 Lbs. 0.20” 0.24” 1.00” 1.00” #8 Black 10
4736L 1.00” Up to 75 Lbs. 0.20” 0.24” 1.00” 1.00” #8 Black 50
4736C 1.00” Up to 75 Lbs. 0.20” 0.24” 1.00” 1.00” #8 Black 100
4736M 1.00” Up to 75 Lbs. 0.20” 0.24” 1.00” 1.00” #8 Black 1,000
JT&T’s Cable Tie Mounts have an adhesive backing - simply peel off backing paper and apply. Clean contact area thoroughly before
applying the mounting base for maximum performance. Bases can be attached to a clean and dry surface of metal, plastic, glass,
paperandpaintedsurfaces.Inadditiontoand/orinplaceoftheadhesivebackinga#6screw(for1”mounts)&#4screw(for0.75”
mounts) can be used to secure the mount onto a surface. A screw or rivet is recommended for extra holding strength against outdoor
elements.4-wayentryformaximumversatility.Lowproleforusewhereheigtislimited.Thecounter-sunkholeinsuresthatthescrew
or rivet will not interfere with your cable tie. Adhesive cable tie mounts have acrylic adhesive bases & are made of industry standard
6/6nylon(offeredinnaturalorblack),theyareinjectionmoldedtogiveyouconsistentperformanceandexactt.1.00”squaremounts
canbeusedonallcabletiesupto14.5”(Length)x.20”(Width)&75Lb.(TensileStrength).0.75”squaremountscanbeusedonall
cabletiesupto8”(Length)x.15”(Width)&40Lb.(TensileStrength).Tough,lightweight&resistanttoaging&mostchemicals.UL
listed&meetsammabilityratingUL94V-2.MeetsstringentCSA&ISO9002internationalstandards&alsomeetsrequirementsof
SAE-AMS-DTL-23190(formerlyMIL-S-23190).Temperatureratingfrom-40°C(-40°F)to85°C(185°F).
Ordering Size Base Dimensions (+/- 0.02”) Screw
Part # (Height) Length Width Size Color Pcs
. 284768-8 0.35” 0.41” 0.34” #2 Natural 10
284768-8 0.35” 0.41” 0.34” #2 Natural 50
284768-2 0.35” 0.41” 0.34” #2 Natural 100
284768-4 0.35” 0.41” 0.34” #2 Natural 1,000
JT&T’s Wire Clamps have an adhesive backing - simply peel off backing paper and apply. Clean contact area
thoroughly before applying the mounting base for maximum performance. Bases can be attached to a clean and
drysurfaceofmetal,plastic,glass,paperandpaintedsurfaces.Inadditiontoand/orinplaceoftheadhesive
backinga#2screwcanbeusedtosecurethemountontoasurface.Funnel-entryformaximumversatility.WireClampsaremadeofindustrystandard6/6nylon,they
areinjectionmoldedtogiveyouconsistentperformanceandexactt.Tough,lightweight&resistanttoaging&mostchemicals.ULlisted&meetsammabilityrating
UL94V-2.MeetsstringentCSA&ISO9002internationalstandards&alsomeetsrequirementsofSAE-AMS-DTL-23190(formerlyMIL-S-23190).Temperaturerating
from-40°C(-40°F)to85°C(185°F).
Funnel-Entry Wire Clamp Mounts - Nylon
• Adhesive-Backed &/or Screw Mount
• Adhesive-Backed &/or Screw Mount