Specifications

Order today, call toll-free 1-800-633-3655 or fax us at 1-775-322-7477
Sleeving
Sleeving
9 8 % F i l l R a t e a n d i n c R e a s e d P R o F i t a b i l i t y – G u a R a n t e e d
www.jttproducts.com [e-mail]
JT&T Products
Import Car/Truck Dress-Up Kits
• To avoid fraying cut sleeving with hot knife.
• Customize your engine compartment & protect your wires, cables & hoses from heat, abrasion & wear.
•TemperatureRating:-70°C(-94°F)to125°C(257°F)    
• Expandstotwires&hosesupto1-3/4”.     
• Sleevingwillexpandupto150%andwilltneatlyoverconnectors,plugs,splices&neatlybundle & protect wire, cable & hose assemblies.
•Endsofthesleevingshouldtuckneatlyundertheexistingterminations;thenheatshrinktubing&cabletieshelpcreateanishedlookforyoursleevinginstallation.
Cutting: It is recommended that sleeving be cut with a hot knife, soldering iron with a cutting tip, or some other system that will cut & seal the ends to prevent fraying.
Whentheendsarecut&sealed,arethemslightlywithyourngerstoallowyourwirestoslipineasily.
Installing & Terminating: The easiest way to install the sleeving over long wire runs is to simply “walk” the sleeve down the length of the wire. Push the slack sleeving
onto the end of the wire & slide it down the entire run. When you reach the end of the installation, slide your hands along the entire length to smooth out the sleeving.
Tonishtheends,youcanuseheatshrinktubingintheappropriatesize,cabletiesorevenelectricaltape.Aftertheendsofsleevingareproperlycut&sealed,
theinstallationwilllastalongtime&produceaprofessional,nishedlookonvirtuallyanywireorhoseapplication.     
Part# Color Quantity
4212F Chrome (Metallic) 1 Kit
4212-0F Black 1 Kit
4212-11F Neon Green (UV Reactive) 1 Kit
4212-13F Neon Yellow (UV Reactive) 1 Kit
4212-15F Neon Blue (UV Reactive) 1 Kit
4212-17F Carbon 1 Kit
Kit Includes
 •1/4”I.D.ExpandableBraidedSleeving 10Ft.
 •3/8”I.D.ExpandableBraidedSleeving 8Ft.
 •1/2”I.D.ExpandableBraidedSleeving 6Ft.
 •3/4”I.D.ExpandableBraidedSleeving 10Ft.
 •1-1/4”I.D.ExpandableBraidedSleeving 4Ft.
 •3/8”I.D.(3to1)HeatShrinkTubing 1Ft.
 •3/4”I.D.(3to1)HeatShrinkTubing 1Ft.
 •1”I.D.(3to1)HeatShrinkTubing 1Ft.
Motorcycle Dress-Up Kits
• Customize your engine & protect wires, cables & hoses from heat, sunlight, abrasion & wear.
• To avoid fraying cut sleeving with hot knife.
•TemperatureRating:-70°C(-94°F)to125°C(257°F)       
•Expandstotwires&hosesupto3/4”.       
•Sleevingwillexpandupto150%andwilltneatlyoverconnectors,plugs,splices&neatlybundle&protectwire,cable&hoseassemblies.  
•Endsofthesleevingshouldtuckneatlyundertheexistingterminations;thenheatshrinktubing&cabletieshelpcreateanishedlookforyoursleevinginstallation. 
Cutting: It is recommended that sleeving be cut with a hot knife, soldering iron with a cutting tip, or some other system that will cut & seal the ends to prevent fraying.
Whentheendsarecut&sealed,arethemslightlywithyourngerstoallowyourwirestoslipineasily.
Installing & Terminating: The easiest way to install the sleeving over long wire runs is to simply “walk” the sleeve down the length of the wire. Push the slack sleeving
onto the end of the wire & slide it down the entire run. When you reach the end of the installation, slide your hands along the entire length to smooth out the sleeving.
Tonishtheends,youcanuseheatshrinktubingintheappropriatesize,cabletiesorevenelectricaltape.Aftertheendsofsleevingare
properlycut&sealed,theinstallationwilllastalongtime&produceaprofessional,nishedlookonvirtuallyanywireorhoseapplication.
Part# Color Quantity
4210F Chrome (Metallic) 1 Kit
4210-0F Black 1 Kit
4210-1F Clear 1 Kit
4210-17F Carbon 1 Kit
4210-4F Purple 1 Kit
Kit Includes
 •3/8”I.D.ExpandableBraidedSleeving 20Ft.
 •1/4”I.D.ExpandableBraidedSleeving 8Ft.
 •1/2”I.D.ExpandableBraidedSleeving 6Ft.
 •3/4”I.D.(3to1)HeatShrinkTubing 1Ft.
 •3-1/2”CableTiesw/MetalBarb 12Pcs.
Trailer Hitch Harness Protection Kit
• Protect your trailer hitch wires from abrasion, sunlight, vibration & wear.
•TemperatureRating:-70°C(-94°F)to125°C(257°F)       
•Sleevingwillexpandupto150%andwilltneatlyoverconnectors,plugs,splices&neatlybundle&protectwire,cable&hoseassemblies.   
•Protectingyourdelicatetrailerhitchwiresfromtheelementshasneverbeensimpler.      
•Theexpandablesleevingslipseasilyoveryour4-wayattrailerconnectors&theincludedheatshrinktubingcreatesatightprotectivesealbetweenthesleeving&theplug.
Cutting: It is recommended that sleeving be cut with a hot knife, soldering iron with a cutting tip, or some other system that will cut & seal the ends to prevent fraying.
Whentheendsarecut&sealed,arethemslightlywithyourngerstoallowyourwirestoslipineasily.
Installing
*
& Terminating: The easiest way to install the sleeving over long wire runs is to simply “walk” the sleeve down the length of the wire. Push the
slack sleeving onto the end of the wire & slide it down the entire run. When you reach the end of the installation, slide your hands along the entire length to
smoothoutthesleeving.Tonishtheends,youcanuseheatshrinktubingintheappropriatesize,cabletiesorevenelectricaltape.Aftertheendsof
sleevingareproperlycut&sealed,theinstallationwilllastalongtime&produceaprofessional,nishedlookonvirtuallyanywireorhoseapplication.   
*
Note: Temporary removal of hoses & wiring will be required to successfully install this sleeving kit.
Part# Color Quantity
4227F Black 1 Kit
Kit Includes
 •1/2”I.D.ExpandableBraidedSleeving 4Ft.
 •1”I.D.(3to1)HeatShrinkTubing 3”
118