Specifications

Order today, call toll-free 1-800-633-3655 or fax us at 1-775-322-7477
Sleeving
Sleeving
9 8 % F i l l R a t e a n d i n c R e a s e d P R o F i t a b i l i t y – G u a R a n t e e d
www.jttproducts.com [e-mail]
JT&T Products
•Aluminumlaminatedberglasssleevingcreatesaheatresistantbufferbetweenhightemperature
environments & the wires, hoses & cables that run through them.
•Sleevinghasbeenlaboratorytestedtotemperaturesupto760°C(1,400°F)
without burning, delaminating or any other degrading effects.
•Canreducetheheattransmissionfromhotpipesorenginecomponentsintohosesorharnesses
 byupto50%ormore.    
•Resistantagainstabrasion,gasoline,chemicals&deectsradiantheat.  
•Cutseasilywithregularscissors.     
•WallThickness:0.042”(+/-0.007”)     
•HalogenFree&Non-Flammable.    
•T6wrapusesaveryaggressive,high-tempadhesivestripthateliminatestheneedforhigh-tempmylar
tape or other adhesive.
•Tousewrapjustputthesleevingaroundanycomponent&sealthesideswithadhesivestriptoprovide
protection from hot pipes & engine component
High-Temp T6 Aluminized Fiberglass Sleeving (Wrap)
• The high-temp aluminized surface is bonded to insulating berglass sleeve; which reects heat away
from wires, hoses & other components.
Part# I.D. Style Quantity Pc
4217F-T6W 1/2” Wrap 4 Ft. 1
4216F-T6W 3/4” Wrap 4 Ft. 1
4218F-T6W 1” Wrap 4 Ft. 1
4219F-T6W 1-1/4” Wrap 4 Ft. 1
4220F-T6W 1-1/2” Wrap 4 Ft. 1
•AlsocalledFireFlex,thissleevingisdenselybraidedfromberglassyarns&coatedwithsilicone,
 whichmakesareresistantshield. 
•Siliconejacketedberglasssleevingisthechoiceofprofessionalsinracing&otherindustrieswhere
protection from constant high temperatures is mandatory.
•Usedonfuel&hydrauliclines,exhaustpipes,coolanthosestocreateastrongthermalbarrier
resistant to heat, gas, solvents, oils, puncture, abrasion & welding sparks.
•Thissleevinghelpsmaintainproperfueltemperatures,protectfromweldingsparks&moltenspray. 
•Cutseasilywithscissorsorsharpknife.   
•InnerDiameter:3/4”     
•HalogenFree.     
•Oncethesleevingismeasured&cuttoproperlength,justslipitoverthehoseorpipeuntilit
covers the area you want to insulate.
•Whenproperlyinstalled,sleevingwillnotmelt,delaminate,burn,becomebrittleorsupport
combustion under normal circumstances.
Black Silicone Coated Fiberglass Sleeving
• Made to withstand heat in sensitive areas up to 260°C (500°F) and short term re exposure up to 537°C (1,000°F).
Part# Color Quantity Pc
4215F Black 4 Ft. 1
116
These
Products Cut
Easily with
Scissors