Specifications

Order today, call toll-free 1-800-633-3655 or fax us at 1-775-322-7477
Sleeving
Sleeving
9 8 % F i l l R a t e a n d i n c R e a s e d P R o F i t a b i l i t y – G u a R a n t e e d
www.jttproducts.com [e-mail]
JT&T Products
106
PET Expandable Sleeving - Clean Cut
JT&T’sClean-CutPETExpandableSleevingexpandsupto150%&isbraidedfrom10milpolyethyleneterepthalate(PET)monolamentyarns.Hasincreasedbraiddensity
for fuller coverage. It is used in electronics, automotive, marine & industrial wire harnessing applications & is ideal for situations where access to a hot knife is impossible.
Theuniquebraidedconstruction&wideexpandabilityallowsquick&easyinstallationoverlargeconnectors&longrunwireorcable.Abrasion&cutresistant;alsoresists
UVradiation,gasoline&otherenginechemicals.ByadjustingthephysicalcharacteristicsofthePETlaments;Clean-CutPEThastheuniqueadvantageofbeingabletobe
cutwithscissors&stillmaintainanextraordinaryfray-resistantend.Frayresistantpropertiesallowfrequentexpansionatthecutendwithoutunraveling.Whencutwithahot
knifeclean-cutPETproducesavirtuallyfraylessend.Availableinadditionalformulations&colorsbyspecialorder.Temperatureratingfrom-70°C(-94°F)to125°C(257°F).
• Can use with scissors for easy, fray
resistant installation.
• No hot knife required.
• Comes on spools.
• Meets requirements of
FAR 25 & FMVSS 302.
• UL Recognized & CSA Certied.
• Continuous Operating Temperature:
-70°C (-94°F) to 125°C (257°F).
• Melting Temperature: 250°C (482°F).
• 1/8” to 1-1/2” sizes available -
some by special order.
• Available in gray color - by special order.
• Flame-Retardant: No.
Flammability Rating: UL94.
• PT Grade & Halogen Free.
• Monolament Diameter: 0.008” (0.20mm).
• Material: Polyethylene Terepthalate (PET).
Ordering Size Expansion Range
Part # Nominal I.D. Min. Max. Color Quantity Pc
4108F 1/8” 1/8” 3.18mm 1/4” 0.64mm Black 20 Ft. 1
4230-100-0 1/8” 1/8” 3.18mm 1/4” 0.64mm Black 100 Ft. 1
4108-0 1/8” 1/8” 3.18mm 1/4” 0.64mm Black 1,000 Ft. 1
4230-100-3 1/8” 1/8” 3.18mm 1/4” 0.64mm Gray 100 Ft. 1
4108-3 1/8” 1/8” 3.18mm 1/4” 0.64mm Gray 1,000 Ft. 1
4109F 1/4” 5/32” 3.96mm 7/16” 11.13mm Black 16 Ft. 1
4231-100-0 1/4” 5/32” 3.96mm 7/16” 11.13mm Black 100 Ft. 1
4109-0 1/4” 5/32” 3.96mm 7/16” 11.13mm Black 1,000 Ft. 1
4231-100-3 1/4” 5/32” 3.96mm 7/16” 11.13mm Gray 100 Ft. 1
4109-3 1/4” 5/32” 3.96mm 7/16” 11.13mm Gray 1,000 Ft. 1
4124F 3/8” 3/16” 4.78mm 5/8” 15.88mm Black 12 Ft. 1
4232-100-0 3/8” 3/16” 4.78mm 5/8” 15.88mm Black 100 Ft. 1
4124-0 3/8” 3/16” 4.78mm 5/8” 15.88mm Black 500 Ft. 1
4232-100-3 3/8” 3/16” 4.78mm 5/8” 15.88mm Gray 100 Ft. 1
4124-3 3/8” 3/16” 4.78mm 5/8” 15.88mm Gray 500 Ft. 1
4110F 1/2” 1/4” 6.35mm 3/4” 19.05mm Black 10 Ft. 1
4233-100-0 1/2” 1/4” 6.35mm 3/4” 19.05mm Black 100 Ft. 1
4110-0 1/2” 1/4” 6.35mm 3/4” 19.05mm Black 500 Ft. 1
4233-100-3 1/2” 1/4” 6.35mm 3/4” 19.05mm Gray 100 Ft. 1
4110-3 1/2” 1/4” 6.35mm 3/4” 19.05mm Gray 500 Ft. 1
4111F 3/4” 5/8” 15.88mm 1” 25.40mm Black 8 Ft. 1
4234-75-0 3/4” 5/8” 15.88mm 1” 25.40mm Black 75 Ft. 1
4111C 3/4” 5/8” 15.88mm 1” 25.40mm Black 100 Ft. 1
4111-0 3/4” 5/8” 15.88mm 1” 25.40mm Black 250 Ft. 1
4234-75-3 3/4” 5/8” 15.88mm 1” 25.40mm Gray 75 Ft. 1
4111-3 3/4” 5/8” 15.88mm 1” 25.40mm Gray 250 Ft. 1
4125F 1” 3/4” 19.05mm 1-3/16” 30.18mm Black 5 Ft. 1
4235-50-0 1” 3/4” 19.05mm 1-3/16” 30.18mm Black 50 Ft. 1
4125-0 1” 3/4” 19.05mm 1-3/16” 30.18mm Black 250 Ft. 1
4235-50-3 1” 3/4” 19.05mm 1-3/16” 30.18mm Gray 50 Ft. 1
4125-3 1” 3/4” 19.05mm 1-3/16” 30.18mm Gray 250 Ft. 1
4236-50-0 1-1/4” 1” 25.40mm 1-1/2” 38.10mm Black 50 Ft. 1
4112-0 1-1/4” 1” 25.40mm 1-1/2” 38.10mm Black 250 Ft. 1
4236-50-3 1-1/4” 1” 25.40mm 1-1/2” 38.10mm Gray 50 Ft. 1
4112-3 1-1/4” 1” 25.40mm 1-1/2” 38.10mm Gray 250 Ft. 1
4237-50-0 1-1/2” 1-1/4” 31.75mm 2” 50.80mm Black 50 Ft. 1
4126-0 1-1/2” 1-1/4” 31.75mm 2” 50.80mm Black 250 Ft. 1
4237-50-3 1-1/2” 1-1/4” 31.75mm 2” 50.80mm Gray 50 Ft. 1
4126-3 1-1/2” 1-1/4” 31.75mm 2” 50.80mm Gray 250 Ft. 1