Users Manual

How to use AI Control
●
AI temperature control optimizes the temperature according to weather forecasts and global weather data.
●
Connect CELLION Smart app and CELLION Heating mat (NOTE : Page 12,13)
CAUTION
※ For safety, AI mode will only be available below heating level 5. (If controller was set at heating level 6 or 7, it will be
automatically reduced to level 5 when you turn on the AI mode.
※ When AI mode is enabled, increasing the heating above Level 5 on the controller of Smart App will turn AI mode off
for safety. To use AI mode again, simply enable it on the app.
●
AI will increase the heating level if outside temperature is lower than the temperature at which AI
mode was turned on.
●
When the outside temperature increases above the temperature at which AI increased the heating,
AI will then reduce the heating.
●
Heating is lowered by 1~2 levels with 2~4˚C increase in outside temperature from the point AI
increased heating.
※ Auto temperature drop is initiated only after AI has increased heating level beforehand.
1) Click on AI Control tab on CELLION Smart App 2) Turn ON the AI mode
※ Choose left or right sides on Queen size
Zero Start (AI Self-turn on) function ZERO START
●
Zero Start is AI Self-turn on feature which is useful for sudden earl morning temperature drops
●
Set heating level to ‘0’ on CELLION Smart app
●
Turn on AI mode with heating set at Level 0 to automatically adjust heating to Level 1 or 2 in the early
morning when outside temperature drops.
E.g.) Heating level 0 is set on controller with timer on 15 hours. During sleep at 5am, when temperature drops,
controller will automatically be set to Level 1 or 2 heating.
Thermal Science for Human Health
1514
AI Mode
Timer
Heating
level
2˚C outside
temperature (based
on weather data)
-4˚C outside
temperature (based
on weather data)
Level 3-> Level 4 Level 3 -> Level 5
AI temperature
control