Operating instructions

NO dial tone on extension telephone
Check that the REO lighttrxon Cel12Tei is NOT ON. Ensure your
extension telephone(s)
are properly plugged into the Cel12Tei . If the
GREEN light @ is not on, check the power cord is connected
properly. See section
UTesting the Setup" on page 6.
Error/Busy tone on extension( s)
No cell phones are currently connected. Ensure a cell phone that has
been paired (see section"Pairing your Bluetooth Cell Phone to
CeIl2Tel" ) with Cell2Tei is within range. Ensure the cell phone
line
is in Auto Connect mode (see section Automatic Bluetooth
Connection).
Rejection caller 10 shown on extension telephone
Your cell phone and cellular service plan must have caller 10
enabled. Not all cell phones support passing the caller 10
information to accessories such as the Ce112Tel, even though they
may show this feature
on the cell phone screen.
Caller 10 does not show name
Generally, the name must be stored in the cell phone book for this to
work. Many cell phones do not support passing the caller name
information to accessories such as the Cel12Tel, even though they
may show
this information on the cell phone screen.
Voice dialing does not work
Not all cell phones support this feature.
Some flip cell phones require that
the flip cover be opened for this
feature to work.
Speed dialing does not work
Not all cell phones support this feature.
Some flip cell phones require that
the flip cover be opened for this
feature to work.
14