Operating instructions

Receiving a Call
When a cell phone has been paired and is currently connected
with Cell2Tel, the telephone plugged into the Cell2Tei should also ring.
Each line has its own distinctive ring pattern. You may also
recognize which line is ringing by looking at the status light on top of
the Cel12Tei. The amber light for a ringing cell phone line will flash with
a unique cadence.
Force Call Connection
Dial tone should be heard when an extension telephone is picked up
to continue an active call that was transferred from your cell phone via
Ce1l2Tel. When this happens dialing to force a connection with the cell
phone call, dial [1 ][Flash] or [2][Flash] for Cell Phone Line 1 or 2
accordingly
and then press [*][#]
Speed Dialing
Some cell phones support speed dialing. Cel12Tei allows you to access
speed dials [2] through [9] from extension telephones.
Use the following steps to access speed dials:
1. Pick up an extension telephone. Listen for dial tone.
2. Optional: Select Cell Phone Line [1 ][Flash] or [2][Flash]
3. Dial speed dial digit [2] to [9]
4. Dial [#]
Example: To activate speed dial 3 on the cell phone paired to Cell
Phone Line 1, press [1 ][Flash] followed by [3][#].
NOTE:
* This feature may not be supported by all cell phones.
* The speed dial numbers for each line are determined by the
individual cell phones.
10