Operating instructions

Manual Bluetooth Connection
You may not want live cell calls to be transferred automatically or you
may want to force your cell phone to disconnect from the Cel12Tei .
V\lhen a cell phone line is connected (amber line status light remains
on), press the said cell phone line button to disconnect that line. In this
case, the amber light will turn off once disconnected and audio will be
transferred to the cell phone so you can continue your call on the cell
phone.
VVhen a cell phone line is not connected and not searching (amber
light remains off) pressing the cell phone line button will put the line
into searching mode (amber light flashes slowly). If the cell phone
has been previously paired and is within reception range, the cell
phone will connect with the Cell2Tei and the amber light will remain
solid.
NOTE:
* Some cell phones will prompt you when you are within range
of the Ce1l2Tel. You can decide to transfer the call to the
Cell2Tei at that time.
TESTING THE SETUP
After connecting one or more telephones to the Cell2Tei , the setup
test feature can be used to ensure proper connections.
1. Ensure the green @ power light is ON and the red itx error light is
NorON
6