Operating instructions

Cell Phone Line #1
9 HINT:
~
k@ .. ;J~-
Co L I I :J 0 J~
)
Cell Phone Line #2
* Each cell phone line can only be paired to ONE cell
phone at a time.
*A cell phone line can be paired to a different cell phone
at any time by repeating the pairing procedure.
* Previous pairing information is lost when pairing is
initiated for the same cell phone line.
*A paired cell phone line can be "unpaired" and prepared
for re-pairing by holding down the line button until the
button flashes rapidly.
* The pairing process can be aborted at any time by
pressing the cell phone line button. In this case, the
previous paired cell phone will be disconnected.
Automatic Bluetooth Connection
Once a cell phone has been paired to a cell phone line, the Cell2Tei will
automatically try to connect wirelessly. When the cell phone goes out
of range, the corresponded cell phone line status light will flash slowly
to indicate it is not connected and is searching for the cell phone.
When the cell phone comes into range of the Cel12Tei connection
should occur automatically and the line status light will turn solid
amber to indicate an active connection.
If you are on a cell call and walk into range, the Cell2Tei and cell phone
will automatically connect. In this case, you will be able to continue
your call without interruption.
If a cell phone line status light is not flashing, and you wish to place
the cell phone line into automatic connection mode, simply press its
corresponded cell phone line button once.
5