Operating instructions

Cell2Tei and these types of cordless phones.
* Some wireless networks (Wi-Fi), such as 802.11 J may
interfere with
Bluetooth radio signals. Keep as much
distance as possible between this type of equipment, the
Cell2Tei and your cell phones.
PAIR YOUR Bluetooth ENABLED
CELL PHONE(S) to Cell2Tei
Your Cell2Tei can be paired (connected) up to two different cell phones,
one cell phone per Cel12Tei line. To pair a Bluetooth cell phone to a
Cel12Tei
line, complete the following steps:
1. Press and hold one of the two cell phone line buttons on the
Cel12Tei until the amber status light flashes rapidly (Press & hold for
approximately 4 seconds to start the status light to flash)
2. Put your cell phone in the mode where the cell phone searches for
Bluetooth devices. This mode should be found in your cell phone's
menu under 'Tools', 'Setup', 'Bluetooth
J
and/or 'Connections' menu. If
given the choice, search for 'Handsfree' devices and select "Look for
Devices". Your cell phone should then scan/search for Bluetooth
devices within range.
3. \f\Ihen the Cel12Tei is found, "Gateway301"will be displayed on your cell
phone's LCD. Accept this device. In order to accept, your cell phone
may ask you to do so by pressing any number of selections including
'select', 'bond', 'pair', 'yes', 'ok', etc.
4. Enter the pass code: '0000'
5. Once the pairing is complete, the selected cell phone line's amber
light button on the Cell2Tei will stop flashing quickly and remain solid.
Once paired, Cel12Tei should remember the cell phone. Your cell
phone will drop the connection when out of range and automatically
re-connect
when within range (approx. 30') of your Cel12Tei.
4