Operating instructions

POWER TELEPHONE CORD
ADAPTER CONNECTION
CONNECTION USB L---_~-I---------...:....:~----J
CONNECTION TELEPHONE SERVICE LINE
* HANGING CONNECTION
LID
•
• •
WAl.lOUTlfT
seTUP
1. Plug a standard corded or cordless
telephone into the Cel12Tei [PHONE] jack I:l
using a regular telephone cord. u-~~.~ ~
2. IF a telephone service landline is used,
plug the telephone service line into the
Cell2Tei [TEL. LINE] jack using the cord
from the wall.
NOTE:
* A hanging lid
a)
To plug the telephone cord into the
[TEL. LINE] jack, move the hanging lid to the left.
b
)To download the new bluetooth firmware, you have to
first DISCONNECT the telephone cord from the
jack of
[TEL.LINE], move the hanging lid to the right,and then plug
USB cord into the USB jack. Once the
new firmware has been
updated, disconnect the
USB cord and complete step a) again.
3. Plug the connection from the supplied power adapter into the
Cell2Tei DC connection and plug end the pronged plug into
a wall power outlet.
4. To pair your Bluetooth cell phone refer to page 4 "Pair Your Bluetooth
Enabled Cell Phone( s) to Ce1l2Tel"
'l)HINT:
* Place your Cel12Tei &cell phone(s) where you have the best
cellular reception in your home or office.
* For best audio quality keep your paired cell phone(s) within
10' of your Cel12Tei
* Using a multi handset cordless phone gives you multiple
extensions.
* Certain cordless phones operate using the 2.4 GHz
frequence. Keep as much distance as possible between the
3