Instruction Manual

3. CHANGING THE PARAMETERS:
3.1 With the CCI Beacon app open showing the list of devices (as shown in gure 3 below), click on
the device you would like to modify. A CONFIG screen should appear lisng the congurable items
as shown in Figure 4 below.
3.2 Click any of the items you wish to change and modify accordingly. When nished click SAVE. You
will be taken back to the CONFIG screen. CLICK the next item you wish to modify—when nished
click SAVE. Once you are nished changing all the parameters according to your needs, click SAVE
again from the CONFIG screen.
3.3 Aer clicking SAVE from the CONFIG screen, a Reboot Beacon pop-up will appear asking for the
password. Enter the proper password and click OK.
3.4 Aer entering the password and then clicking OK, a small SET SUCCESS pop-up screen should briey
appear before taking you back to the DEVICE screen.
3.5 The CCI Beacon is ready for use.
DEVICES
Name
major
minor
CCI Beacon_017 MAC: AC:27:3F:26:7E:EC
0 0 YES 17.34m
RSSI MAJOR MINOR CONN
UUID: CBA440B7 - CC47– A433-B407-E07B739689AA
CCI Beacon_014 MAC: AC:23:3F:26:5E:EC
0 0 YES 17.41m
RSSI MAJOR MINOR CONN
UUID: CBA440B7- CDI7-A432-B407-E05B799679AA
CCI Beacon_019 MAC: AC:29:3G:26:5E:EC
0 0 YES 27.47m
RSSI MAJOR MINOR CONN
UUID: CBA44079 - CC77 - A434 - B407- E05B799697
Figure 3
CONFIG SAVE
UUID 0
MAJOR 0
MINOR 0
Measured Distance -59
Transmission Power 7
Broadcasng Interval 9
Serial ID 014
Beacon Name Prison
Connecon Mode YES
Reboot Password
Figure 4
Reboot Beacon
Please input Password
______________________
Cancel OK
SET SUCCESS
Page 6
Instrucon Manual
Model CCICWE2