Installation guide

95 | Page Celestix HOTPin Appliance Installation Guide
Safety Precautions
 Do not overload the AC supply branch circuit that provides power to the
server.
 Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
 Plug the power cord into a grounded electrical outlet that is easily
accessible at all times.
 Unplug the power cord from the inlet on the appliance rear panel to
disconnect power to the server.
 Do not place anything on the power cords or cables. Arrange them so
that no one can accidentally step on or trip over them. Do not pull on a
cord or cable. When unplugging the cord from the electrical outlet,
grasp the cord by the plug.
 Do not plug telecommunications/telephone connectors into the NIC
connectors.
 This server contains an internal lithium battery. There is a risk of fire and
burns if battery is not handled properly. Do not attempt to recharge the
battery. Do not expose the battery to temperatures higher than 60 °C.
Do not disassemble, crush, puncture, short external contact, or dispose
of battery in fire or water.
 Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by Celestix. Dispose of used
batteries according to local regulations for hazardous waste.
WARNING:
!
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
!
DISPOSE OF USED BATTERIES ACCORDING TO HAZARDOUS
WASTE PROCEDURES AS REQUIRED IN YOUR AREA.
!
HAZARDOUS MOVING PARTS.
!
KEEP FINGERS AND OTHER BODY PARTS AWAY.