Installation guide

Celestix HOTPin Appliance Installation Guide Page | 74
The following examples show the minimum and maximum information to be
included in the users file.
Minimum information examples:
[Users]
jsmith,John Smith
mjane,Mary Jane
Please Note: In the above example, all the users will be added with the default
software token and will be active.
Maximum information examples:
[Users]
jsmith,John Smith,Remote access user
jsmith.,[e-mail],1.222.555.1111,,1
mjane,Mary Jane,Remote access user
mjane,[e-mail],1.222.555.3333,ClxEmailOtp,1
jlee,Jason Lee,,,,,0
Please Note: In the above example, mjane was added with a custom token
provider, and jlee was added with the default provider (note the
successive commas used for blank field entries) but set to
inactive.
Assign an External Key to a User Account
This section provides details for assigning external keys to user accounts. If your
organization uses devices like hard tokens, you will first need to import token
keys for those devices to HOTPin. Then you can assign the keys, and thus the
device to user accounts.
Please Note: They are called external keys because HOTPin does not generate
them.
To assign an external key:
Navigate to HOTPin|Users. 1.
Select a user from the list. 2.
Click Properties. 3.
Select the Token tab. 4.
Click Assign External Key. 5.
Select a key from the Assign Key list. 6.