Installation guide

57 | Page Celestix HOTPin Appliance Installation Guide
To access SMS provider properties:
Navigate to HOTPin|Providers. 1.
Select the SMS OTP Provider from the list. 2.
Click Properties to open the provider configuration screen. 3.
Click OK to save the settings you entered. 4.
The following subsections explain the items on the Provider Properties page.
Illustration 16 provides a reference.
Illustration 16 - SMS OTP Provider Properties
Settings and Customizable Fields:
 Communication Settings
This property defines how the provider communicates with the modem
attached to your appliance. The provider includes default configuration
that may work for your system, but you should consult your modem's
documentation for definitive connection settings. Properties include:
 COM port – enter the communication serial port number,
physical or virtual, that the modem is connected to (see COM
Port Locations for information).
 Stop bits – enter the number of stop bits per byte.
 Baud rate – enter the serial port baud rate.
 Handshake – indicate the handshaking protocol for serial port
transmission of data.
 Parity – indicate the parity-checking protocol.
 Timeout (milliseconds) – enter the maximum amount of time in
milliseconds the provider will wait to get a response from the
modem. This value must be between 100 (one-tenth of second)