Installation guide

Celestix HOTPin Appliance Installation Guide Page | 56
HTTP samples:
http://sms.server.com/service.aspx?ph={phone}&text={cod
e}
http://sms.server.com/service.aspx?ph={phone}&text=Toke
n%20code%20{code}
http://10.1.1.1:2000/service.aspx?ph={phone}&text={code}
Secure sample passing a service login user name and password
with token information:
https://sms.server.com/service.aspx?user=admin&pwd=123
456&ph={phone}&text={code}
 Log the website response HTML for debugging – a tool to help
system administrators debug HTTP provider operation by logging the
returned HTML pages from the web server to HTTP provider log files
(HOTPin|Log Files). This should only be used as a temporary
debugging tool because one response is logged for each token code
request.
 Use a proxy server to access website – enable a proxy server to send
token code messages and include the necessary information below.
 Server address – specify the proxy server address.
 Server port – specify the server port to use.
 Bypass proxy on local address – select to bypass the proxy
server for local addresses.
 Set proxy server credentials – select to enable and include
credential information (Proxy server user, Domain, Password)
if required.
See the previous section Test Provider Feature for information about using the
tool to check the configuration you entered. If you do not receive the test OTP,
try the following troubleshooting steps:
 Confirm your provider configuration.
 Check the user information you entered.
 Check firewall settings; depending on your deployment, this may
include the Windows Firewall, TMG, or an external firewall.
For more information about token provider settings, see Configure System
Settings : Token Provider.
Configure the SMS OTP Token Provider
The SMS OTP Token Provider sends a token code to a mobile phone via a
GSM/GPRS Serial or USB Modem connected directly to your appliance. The
provider only connects to the modem when sending a message; it disconnects
when finished.