Installation guide

Celestix HOTPin Appliance Installation Guide Page | 54
 Subject – identifies the message; HOTPin OTP is the default static text.
 Message – message content; usually contains at least the {code} tag,
which will be replaced with the current token code when HOTPin sends
the message to the user.
Replaceable Tags for the To, Subject, and Message fields:
 {user_name} – the user's login name.
 {user_full_name} – the user's full name.
 {email} – the user's email address.
 {phone} – the user's phone number.
 {code} – the next token code.
 {timestamp} – the date and time the request was sent
to the provider.
Important: Without the {code} tag included in the Subject or Message
field, the message will not provide a token code to the
user.
 Email server address – enter the mail server name or IP address.
 Port – enter the mail server port number.
 Connect using SSL – select the protocol your mail server uses.
 Use email server authentication – select if necessary for your email
server and include credential information (User name, Domain,
Password) if required.
See the previous section Test Provider Feature for information about using the
tool to check the configuration you entered. If you do not receive the test OTP,
try the following troubleshooting steps:
 Confirm your provider configuration.
 Check the user information you entered.
For more information about token provider settings, see Configure System
Settings : Token Provider.
Configure the HTTP OTP Token Provider
The HTTP OTP Token Provider sends the next valid token code to a predefined
URL via HTTP or HTTPS. The URL is configured with special tags that are
replaced with a user's current values to produce a URL with unique query
variables (for example, http://host/?phone={phone}&code={code}). This provider
is generally used to send the code to an SMS server that will then send it to a
user's mobile phone.
To access HTTP provider properties:
Navigate to HOTPin|Providers. 1.
Select the HTTP OTP Provider from the list. 2.
Click Properties to open the provider configuration screen. 3.
Click OK to save the settings you entered. 4.