Installation guide

Celestix HOTPin Appliance Installation Guide Page | 36
to manage their HOTPin accounts. The AD Settings tab provides the
configuration that allows HOTPin to connect to Active Directory.
To enable the user provisioning website:
Navigate to HOTPin|User Website. 1.
Select Enable user website to allow access to the HOTPin User 2.
Website.
Click OK to return to the main HOTPin screen when you are done. 3.
Please Note: To disable the site, deselect the Enable user website checkbox.
If you disable the user site, the AD Settings tab configuration will
be erased.
If all features are enabled, the HOTPin User Website main screen will display
similar to the example in Illustration 7 below.
Illustration 7 - HOTPin User Website Fully Enabled
When the HOTPin site is first enabled, all individual functions are enabled by
default. Next you should review and adjust configuration on the Website
Settings and AD Settings tabs to suit your organization’s deployment. For
example, if AD Synchronization is deployed, you will need to disable end user
account creation and edit features. Instructions are covered in the steps that
follow, and configuration details are discussed in the subsequent topics.
To edit user website settings:
If necessary, navigate to HOTPin|User Website. 1.
Select one of the following tabs: 2.
• Website Settings – configure user access to the following site
features: